Dead after flashing
Re: Dead after flashing
Ah, OK it's good then. The wire insulation stops right over the wrong one, couldn't see there was still something going further on the other photo. Careful with shorts with such long open wires.
Re: Dead after flashing
Hi, my progresssssss today I'm gonna get the 1Mhz oscillator, went last Monday but the sales man told me they run out of stock. I'll post the result tomorrow, anyway I've got a new Attmega64 to replace in case the 1Mhz doesnt works....
Stay tuned
Stay tuned
Good winds and......happy Flight !
Re: Dead after flashing
Just one thing, what programmer do you have, and when you add the -B 100 in the extra avrdude parameters and try to program, do you have the "cannot set sck period" error in the result window?
Just trying to stay ahead, because for both the external oscillator method or the new AVR you'll need a programmer that does NOT exhibit this error.
Just trying to stay ahead, because for both the external oscillator method or the new AVR you'll need a programmer that does NOT exhibit this error.
Re: Dead after flashing
Belive it or not....It's working again !!!!!!
Tried the oscillator method.....X doesn't works....
Re-check wires....................X doesn't works...
Removed Atmega64 and replaced with a new one.... WORKS!!!!!
It was a bit hard since I don't have the proper tools so I've used the wire under pins method.... (VERY INTERESTING!) use google translator 'cause the article its on spanish...
http://www.technoarchivos.com/2010/11/c ... s-smd.html
Bad Atmega64
Flashing...
Working 9x
Thanks a lot for ALL the inputs, I'm happy to get my radio working again now its time to finish my cox micro warbird and go to the fields....
Good winds and......happy Flight !
- Rob Thomson
- Site Admin
- Posts: 4543
- Joined: Tue Dec 27, 2011 11:34 am
- Country: United Kingdom
- Location: Albury, Guildford
- Contact:
Re: Dead after flashing
Well done
Pity you did not install the 128! Then with open9x you could have had more storage
Pity you did not install the 128! Then with open9x you could have had more storage
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
Re: Dead after flashing
Hey, I knew you would fix it.. well done. Muy bien..
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Dead after flashing
BTW.... I know this its not the correct forum to ask about the open9x but....does anybody knows how to trim a plane just using one of the switchs? I've read in another forum (I dont remember where) about trimming an airplane just trimming it and then pressing / activating one of the switch...
Thanks in advance
Thanks in advance
Good winds and......happy Flight !
- Rob Thomson
- Site Admin
- Posts: 4543
- Joined: Tue Dec 27, 2011 11:34 am
- Country: United Kingdom
- Location: Albury, Guildford
- Contact:
Re: Dead after flashing
Check the custom functions. There is an instant trim function.
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
Re: Dead after flashing
I live in Germany pero soy portugues..solmer wrote:Thanks !!!! Vielen Dank
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Dead after flashing
jhsa wrote:I live in Germany pero soy portugues..solmer wrote:Thanks !!!! Vielen Dank
Sorry, sooo Obrigado We're neighbours
Good winds and......happy Flight !
Re: Dead after flashing
Rob Thomson wrote:Check the custom functions. There is an instant trim function.
Thnx done
Good winds and......happy Flight !