Dead after flashing

[Kilrah]

Ah, OK it's good then. The wire insulation stops right over the wrong one, couldn't see there was still something going further on the other photo. Careful with shorts with such long open wires.

[solmer]

Hi, my progresssssss today I'm gonna get the 1Mhz oscillator, went last Monday but the sales man told me they run out of stock. I'll post the result tomorrow, anyway I've got a new Attmega64 to replace in case the 1Mhz doesnt works....

Stay tuned

[Kilrah]

Just one thing, what programmer do you have, and when you add the -B 100 in the extra avrdude parameters and try to program, do you have the "cannot set sck period" error in the result window?
Just trying to stay ahead, because for both the external oscillator method or the new AVR you'll need a programmer that does NOT exhibit this error.

[solmer]

Belive it or not....It's working again !!!!!!

Tried the oscillator method.....X doesn't works....
Re-check wires....................X doesn't works...
Removed Atmega64 and replaced with a new one.... WORKS!!!!!

It was a bit hard since I don't have the proper tools so I've used the wire under pins method.... (VERY INTERESTING!) use google translator 'cause the article its on spanish...

http://www.technoarchivos.com/2010/11/c ... s-smd.html


Bad Atmega64


Flashing...



Working 9x




Thanks a lot for ALL the inputs, I'm happy to get my radio working again now its time to finish my cox micro warbird and go to the fields....

[Rob Thomson]

Well done

Pity you did not install the 128! Then with open9x you could have had more storage

[jhsa]

Hey, I knew you would fix it.. well done. Muy bien..

[solmer]

Thanks !!!! Vielen Dank

[solmer]

BTW.... I know this its not the correct forum to ask about the open9x but....does anybody knows how to trim a plane just using one of the switchs? I've read in another forum (I dont remember where) about trimming an airplane just trimming it and then pressing / activating one of the switch...

Thanks in advance

[Rob Thomson]

Check the custom functions. There is an instant trim function.

[jhsa]

Thanks !!!! Vielen Dank

I live in Germany pero soy portugues..

[solmer]

Thanks !!!! Vielen Dank

I live in Germany pero soy portugues..

Sorry, sooo Obrigado We're neighbours

[solmer]

Check the custom functions. There is an instant trim function.

Thnx done