M128 Upgrade to Turnigy 9X
M128 Upgrade to Turnigy 9X
I have been looking thru a few posts and topics and I have not really found the answers I am looking for...
The question is what are the pros of upgrading the CPU of these Stock Boards on the T9X?
I have found alot regarding the increase of Models that are permitted on the Radio now.... for me that is not a big deal. I fly 2-3 Models(quad/heli/plane). For me I want to know if there is more? Like do I get more options? Do I get more Voice Switches, More FP's for Mode Displays? etc....
I have pretty much every upgrade there is for the radio.. I just need more options for voice feedback, etc....
Is there a comprehensive list anywhere?
Thanks a million for your input.
Pino (a.k.a LTMNO)
p.s. apologize if I did not find the thread on this...
The question is what are the pros of upgrading the CPU of these Stock Boards on the T9X?
I have found alot regarding the increase of Models that are permitted on the Radio now.... for me that is not a big deal. I fly 2-3 Models(quad/heli/plane). For me I want to know if there is more? Like do I get more options? Do I get more Voice Switches, More FP's for Mode Displays? etc....
I have pretty much every upgrade there is for the radio.. I just need more options for voice feedback, etc....
Is there a comprehensive list anywhere?
Thanks a million for your input.
Pino (a.k.a LTMNO)
p.s. apologize if I did not find the thread on this...
Custom 9x with M64/Telemetry Mod
Re: M128 Upgrade to Turnigy 9X
Double the model storage, and (for openTx) the ability to fit more (all) of the options that are shown in c9x in the flash.
So if you don't care about model storage and all the options you want already fit on the m64 there is no advantage.
So if you don't care about model storage and all the options you want already fit on the m64 there is no advantage.
Re: M128 Upgrade to Turnigy 9X
Hi Kilrah, so are you referring to these options?
This vs.
This so there is not an option to have more Switches? for Voice?
This vs.
This so there is not an option to have more Switches? for Voice?
Custom 9x with M64/Telemetry Mod
Re: M128 Upgrade to Turnigy 9X
Yes those. No more switches/flight modes etc as those would require more RAM, which the 128 doesn't have.
- MikeB
- 9x Developer
- Posts: 18000
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: M128 Upgrade to Turnigy 9X
I'm hoping to add more features to er9x-128, just need enough time!
I'm working on XJT module support, the '128 version will have more support for it.
The '128 version of er9x does include some small additions, like when you are editing a field that wants a switch set, you can just move the required switch to set it.
Mike.
I'm working on XJT module support, the '128 version will have more support for it.
The '128 version of er9x does include some small additions, like when you are editing a field that wants a switch set, you can just move the required switch to set it.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: M128 Upgrade to Turnigy 9X
When did you add that?!MikeB wrote: The '128 version of er9x does include some small additions, like when you are editing a field that wants a switch set, you can just move the required switch to set it.
- MikeB
- 9x Developer
- Posts: 18000
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: M128 Upgrade to Turnigy 9X
5th Aug 2013. Also there is now only 1 build for the 128, there is an option to set whether you have done the FrSky mod for telemetry!
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: M128 Upgrade to Turnigy 9X
For people with the telemetry mod done:
You will have to turn the telemetry mod option ON after you flash the FW as it comes OFF by default..
Just to avoid you scratching your head that much
João
You will have to turn the telemetry mod option ON after you flash the FW as it comes OFF by default..
Just to avoid you scratching your head that much
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: M128 Upgrade to Turnigy 9X
Hi Kilrah, apologize for asking... just a little confused here... Switches/Flight Modes... those work in 64 version now... as I have switches in there along with FM's.Kilrah wrote:Yes those. No more switches/flight modes etc as those would require more RAM, which the 128 doesn't have.
I am using OpenTx with
5 Flight Modes (0-4) and I think there are only
16 Custom Functions with
12 Custom Switches
Does this increase with 128 Chip is more or less the question? ( I assume that has to be built in the Prog? )
Custom 9x with M64/Telemetry Mod
Re: M128 Upgrade to Turnigy 9X
And as I said, no there is the same number, as putting more would require more RAM which the 128 doesn't have. The 128 has more flash and EEPROM, but the same amount of RAM.
Re: M128 Upgrade to Turnigy 9X
Mike, I know you are busy and I would never put more on your plate... you already do too much.. that's Joao's job... (canadian humour)MikeB wrote:I'm hoping to add more features to er9x-128, just need enough time!
I'm working on XJT module support, the '128 version will have more support for it.
The '128 version of er9x does include some small additions, like when you are editing a field that wants a switch set, you can just move the required switch to set it.
Mike.
I think I read that feature in the forum somewhere, that is very cool. I am not sure what the limits on the switch counts and custom functions in er9x anymore...
For me, I just want to be able to set as many as possible as I am using ArduCopter mostly and that version of firmware as I don't like the screens, I just use OSD along with Telem on Tx Screen. I need the audibles for when I am FPV'ing to sound off alerts that I don't want to clutter the OSD Screen or might not be paying attention too.
and when I fly LOS, I would like the audibles as well.
Edit: just put er9x on again...
16 Voice Switches
12 Custom Switches
5 Flight Modes (no ability to title them) from what i can see. (The purpose of this is to see what Mode I am in for APM (Stable/Acro/Auto, etc) and to sound the Audible... that can be elsewhere separately...
Last edited by LTMNO on Thu Sep 05, 2013 3:17 pm, edited 4 times in total.
Custom 9x with M64/Telemetry Mod
Re: M128 Upgrade to Turnigy 9X
ah, okay, now I am seeing the light bulb... sorry... any options? another chip that has more ram?Kilrah wrote:And as I said, no there is the same number, as putting more would require more RAM which the 128 doesn't have. The 128 has more flash and EEPROM, but the same amount of RAM.
Custom 9x with M64/Telemetry Mod
Re: M128 Upgrade to Turnigy 9X
atmega 2561 Doubles the RAM also..
But still being tested..
João
But still being tested..
João
Ah, thanks for the complementMike, I know you are busy and I would never put more on your plate... you already do too much.. that is Joao is for... (canadian humour)
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: M128 Upgrade to Turnigy 9X
I had a feeling that I knew that answer.... the 2561...I was following that thread too... just so much information some times... yes I have one of those chips waiting around as well... just not making the leap as I still want a functioning system.. I think I need to order another radio for testing...jhsa wrote:atmega 2561 Doubles the RAM also..
But still being tested..
JoãoAh, thanks for the complementMike, I know you are busy and I would never put more on your plate... you already do too much.. that is Joao is for... (canadian humour)
as for the complement... just giving the due credit where needed... lots of love in this forum.... its all good, you are a fantastic catalyst... I wish I grasped as much as you do to contribute.
Custom 9x with M64/Telemetry Mod
- MikeB
- 9x Developer
- Posts: 18000
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: M128 Upgrade to Turnigy 9X
I think the '2561 version of er9x is OK, I just can't fully test it as I don't have enough radios for everything either. I have three 9Xs, one M64, one M128 and the third is ersky9x, nowhere for a '2561 version!
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: M128 Upgrade to Turnigy 9X
Maybe some of us could donate a new 9x to you, or a 9XR board, or whatever you need..
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- MikeB
- 9x Developer
- Posts: 18000
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: M128 Upgrade to Turnigy 9X
I've got the spare main board from the ersky9x Tx. I will, at least, try to find time to put the '2561 on that.
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: M128 Upgrade to Turnigy 9X
Crickets...
I will put up 50% of the radio cost of $49.95. ($25)
I will put up 50% of the radio cost of $49.95. ($25)
Custom 9x with M64/Telemetry Mod
Re: M128 Upgrade to Turnigy 9X
I will put another 25$
Thanks Mike for all the magic, you are doing for us.
Thanks Mike for all the magic, you are doing for us.
Re: M128 Upgrade to Turnigy 9X
Then its done, 'mohtar' and I pay for the radio and 'Joao' pays for the shipping...
You got yourself a new radio to test with.
You got yourself a new radio to test with.
Custom 9x with M64/Telemetry Mod
Re: M128 Upgrade to Turnigy 9X
Great.
I already donated 25$ to Mike's PayPal account.
I already donated 25$ to Mike's PayPal account.
Re: M128 Upgrade to Turnigy 9X
Where can I find it?
Never mind, found it
Never mind, found it
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: M128 Upgrade to Turnigy 9X
Me too... Monies Sent! $25 USD
Thanks Mike...
Thanks Mike...
Custom 9x with M64/Telemetry Mod
- MikeB
- 9x Developer
- Posts: 18000
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: M128 Upgrade to Turnigy 9X
Thanks all!
I'll get another radio ordered soon.
Mike.
I'll get another radio ordered soon.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: M128 Upgrade to Turnigy 9X
Thank you Mike
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- MikeB
- 9x Developer
- Posts: 18000
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: M128 Upgrade to Turnigy 9X
Thanks very much guys, an extra Tx for testing the '2561 is now on its way.
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: M128 Upgrade to Turnigy 9X
Thank you..
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: M128 Upgrade to Turnigy 9X
Thanks to you Mike... looking forward to more voice switches... I will order another radio myself so that i have my original mod'd M64 untouched until I am ready to change that one too. I tell you, ordering from China has been great.. 5-7 days at most to Canada... Air Mail... Have a great weekend all!
Custom 9x with M64/Telemetry Mod
- MikeB
- 9x Developer
- Posts: 18000
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: M128 Upgrade to Turnigy 9X
New Tx for testing just arrived. I have a chip transplant to do now! Thanks to those three who donated to help me get it.
Interestingly it is a Turnigy brand, but looks like it has the same black plastic case as the FlySky brand rather than the grey. The black FlySky plastic seems less likely to strip when doing up the screws.
LTMNO: Just testing a version of er9x for the, '128 and '2561, with 6 extra custom switches and 8 extra voice switches. Lots of changes in this to do with the stick mode and XJT support, I'm sure I will have missed something!
Mike.
Interestingly it is a Turnigy brand, but looks like it has the same black plastic case as the FlySky brand rather than the grey. The black FlySky plastic seems less likely to strip when doing up the screws.
LTMNO: Just testing a version of er9x for the, '128 and '2561, with 6 extra custom switches and 8 extra voice switches. Lots of changes in this to do with the stick mode and XJT support, I'm sure I will have missed something!
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: M128 Upgrade to Turnigy 9X
Hi Mike, that is fantastic your got your radio(pretty quickly it seems)... I have ordered mine as well... just waiting patiently so that I can help test things out for you as well.
Awesome about the switches... Thanks!
Pino.
Awesome about the switches... Thanks!
Pino.
Custom 9x with M64/Telemetry Mod