I have this LED light kit installed on my HK Tundra airplane:
https://www.ebay.com/itm/Flash-LED-Ligh ... %7Ciid%3A1
The lights are plugged into channel 7 on my Rx and I tried setting the input for channel 7 to one of my switches, but nothing happens. Also tried adding it to the mixer but still nothing. just stays one. What might I be missing? Can't seem to find a straight answer. I followed one video but only difference is I'm not using a Turnigy switch. just the supplied power pack with the lights plugged into it and it plugged into the Aux2/channel 7 port on the Rx.
Turn LED lights on and off using a switch on QX7?
-
- Posts: 33
- Joined: Sat Jul 27, 2019 7:02 pm
- Country: -
Re: Turn LED lights on and off using a switch on QX7?
This shows no signal wire so doesn't appear to be controllable, just always on.
Hence a Turnigy switch to turn it off in the video you saw...
Hence a Turnigy switch to turn it off in the video you saw...
-
- Posts: 33
- Joined: Sat Jul 27, 2019 7:02 pm
- Country: -
Re: Turn LED lights on and off using a switch on QX7?
Rats! I guess you get what you pay for.