2 issues/questions.
1. It seems like my TX responds very slowly to "Model Select" - is this normal? Take well over 30 sec to respond.
2. I have set up a user interface screen for a new model but for some reason the TX does not save it. If I select another model and then come back to the new model the screen does not reflect how I had set it up. Is this a bug? I have about 10 different models setup, al work fine except for the new model
.
TIA for any help
Horus X10
Re: Horus X10
No, unless you used inappropriately sized model images.
Your SD card might be having problems.
Your SD card might be having problems.
Re: RE: Re: Horus X10
Shouldn't the radio just ignore inappropriately sized images then?Kilrah wrote:No, unless you used inappropriately sized model images.
João
Sent from my BLN-L21 using Tapatalk
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Horus X10
No because it works, it's just slower. If you'd rather take the speed hit than bother about resizing/cropping the images it's your choice.
Re: Horus X10
Thanks again Kilrah - it was " inappropriately sized model images"
Re: Horus X10
On this radio, models are kept only on the SD Card, right? The active model remains in the radio's memory? what about if something happens, a software crash, for something reason RAM gets corrupt and the radio needs to load the model again?
Or doesn't it work this way at all?
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Horus X10
The active model is in RAM and a copy is held in the battery-backed backup RAM so it can be loaded form there in case of software crash.
Re: Horus X10
Does the radio have an alarm for when that battery is empty?
João
Sent from my BLN-L21 using Tapatalk
João
Sent from my BLN-L21 using Tapatalk
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- MikeB
- 9x Developer
- Posts: 17996
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Horus X10
In the case of a software crash, as long as the main power stays on the backup RAM remains valid.
If the backup RAM is enabled to be kept from the battery, the (RTC) battery life is significantly reduced, getting close to halved.
I added code to erskyTx to read and report the (RTC) battery voltage and this has been passed to Bertrand.
For information, the lowest valid battery voltage is 1.65V
Mike
If the backup RAM is enabled to be kept from the battery, the (RTC) battery life is significantly reduced, getting close to halved.
I added code to erskyTx to read and report the (RTC) battery voltage and this has been passed to Bertrand.
For information, the lowest valid battery voltage is 1.65V
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Horus X10
Thanks for the explanatiins Mike and Kilrah.
João
Sent from my BLN-L21 using Tapatalk
João
Sent from my BLN-L21 using Tapatalk
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW