taranis nano qx hassles
taranis nano qx hassles
taranis with orange module, mode 1,PPM 22.5 @ 300 +, binds properly, nano will fly but aileron and rudder work opposite, ie push stick left ailerons to the right push rudder left nano turns right.I'm very new to rc hope someone can help
Re: taranis nano qx hassles
angryrc wrote:taranis with orange module, mode 1,PPM 22.5 @ 300 +, binds properly, nano will fly but aileron and rudder work opposite, ie push stick left ailerons to the right push rudder left nano turns right.I'm very new to rc hope someone can help
Re: taranis nano qx hassles
You need to reverse those channels. In the mixer switch them to negative values.
angryrc wrote:taranis with orange module, mode 1,PPM 22.5 @ 300 +, binds properly, nano will fly but aileron and rudder work opposite, ie push stick left ailerons to the right push rudder left nano turns right.I'm very new to rc hope someone can help
Re: taranis nano qx hassles
switch the Chanel it will be okey.
- deaconFlyer
- Posts: 76
- Joined: Fri Apr 05, 2013 11:22 am
- Country: Canada
- Location: Ontario
Re: taranis nano qx hassles
I found that 22.5 @ 400 U.S. was more stable ... AND set all the server throws to +/- 80% (even ch6)
Make sure the polarity is Negative
Channel 2 & 4 are INV
Mix CH6 -> SF Weight (+100%) Switch(!SC¥) NoTrim. .... ¥=down arrow
Good luck!
Make sure the polarity is Negative
Channel 2 & 4 are INV
Mix CH6 -> SF Weight (+100%) Switch(!SC¥) NoTrim. .... ¥=down arrow
Good luck!