Model Artwork for Taranis
-
- 9x Developer
- Posts: 2764
- Joined: Fri Dec 30, 2011 11:11 pm
- Country: -
Re: Model Artwork for Taranis
And one for my porket
http://www.modelisme.com/forum/helico-d ... 110-a.html
http://www.modelisme.com/forum/helico-d ... 110-a.html
Re: Model Artwork for Taranis
Here is a the Talon BMP is a compressed file:danidroid wrote:can someone help me with the artwork for talon mini
http://www.hobbyking.com/hobbyking/stor ... 044(1).jpg
- Attachments
-
- Talon.zip
- (603 Bytes) Downloaded 708 times
Re: Model Artwork for Taranis
Here is the tricopter BMP in a compressed file:xmonster wrote:Can someone help me to create the artwork of the above.
- Attachments
-
- Tricoptr.zip
- (565 Bytes) Downloaded 639 times
Re: Model Artwork for Taranis
Here is the porket BMP in a compressed file:bertrand35 wrote:And one for my porket
http://www.modelisme.com/forum/helico-d ... 110-a.html
- Attachments
-
- Porket.zip
- (750 Bytes) Downloaded 595 times
-
- 9x Developer
- Posts: 2764
- Joined: Fri Dec 30, 2011 11:11 pm
- Country: -
Re: Model Artwork for Taranis
Oh excellent, thanks a lot!!!
Re: Model Artwork for Taranis
You bet! It was the best I could do with the pictures they had of it. If you have a great picture you have of it at the correct angle that allows me to use the whole 64x32 space, let me know and I'll redo the BMP with the new picture. I don't mind.
Re: Model Artwork for Taranis
Here's my first try...
The Great Planes Kunai
The Great Planes Kunai
- Attachments
-
- Kunai.zip
- Great Planes Kunai
- (1.9 KiB) Downloaded 650 times
Bye,
Oliver
Oliver
Re: Model Artwork for Taranis
Could someone make an artwork of the Phantom 2 for me?
Thanks in advance.
Thanks in advance.
Re: Model Artwork for Taranis
There should already be at least one in the thread.
-
- Posts: 13
- Joined: Sat Sep 27, 2014 1:00 am
- Country: -
Re: Model Artwork for Taranis
Here is a BMP for a PA Addiction and one for a LightninBug DLG
- Attachments
-
- TaranisBMP.zip
- PA Addiction and LightninBug DLG
- (915 Bytes) Downloaded 636 times
Last edited by boomerwing on Sun Oct 05, 2014 6:08 pm, edited 3 times in total.
-
- Posts: 13
- Joined: Sat Sep 27, 2014 1:00 am
- Country: -
Re: Model Artwork for Taranis
Another Addiction BMP
- Attachments
-
- addiction2.zip
- PA Addiction BMP
- (1.04 KiB) Downloaded 568 times
Last edited by boomerwing on Mon Oct 06, 2014 1:48 pm, edited 1 time in total.
-
- Posts: 13
- Joined: Sat Sep 27, 2014 1:00 am
- Country: -
Re: Model Artwork for Taranis
Corrected length of filename for the PA Addiction BMP just submitted.
- Attachments
-
- addiction2.zip
- PA Addiction BMP
- (1.04 KiB) Downloaded 559 times
Last edited by boomerwing on Sun Oct 05, 2014 3:17 pm, edited 2 times in total.
Every project is just practice for the next one.
-
- Posts: 13
- Joined: Sat Sep 27, 2014 1:00 am
- Country: -
Re: Model Artwork for Taranis
Here are two PA Addiction Splash screens, an AJ 74 Fighter Splash screen and a Tomboy Splash screen to try.
- Attachments
-
- Splash.zip
- (23 KiB) Downloaded 553 times
Last edited by boomerwing on Sun Oct 05, 2014 3:16 pm, edited 2 times in total.
Every project is just practice for the next one.
- Scott Page
- Posts: 864
- Joined: Wed Dec 28, 2011 3:32 am
- Country: United States
- Location: Tri-Cities, Washington State
Re: Model Artwork for Taranis
747-400 by request. .bmp files are in the zip file. Icon and splash screen.
- Attachments
-
- 747.zip
- (31 KiB) Downloaded 491 times
Re: Model Artwork for Taranis
Nice! Gotta love the jumbo jet. They are becoming less common each year, unfortunately.
Re: Model Artwork for Taranis
Made three images for the RVJET.
- Attachments
-
- taranis-rvjet-images.zip
- (1.48 KiB) Downloaded 501 times
-
- Posts: 13
- Joined: Sat Sep 27, 2014 1:00 am
- Country: -
Re: Model Artwork for Taranis
Here are some ideas for personalizing the Splash Screen.
- Attachments
-
- Personalsplash.zip
- (16.16 KiB) Downloaded 520 times
Every project is just practice for the next one.
Re: Model Artwork for Taranis
Just created some icons for my Lanxiang F4F Wildcat.
- Attachments
-
- Artwork_16.zip
- (2.58 KiB) Downloaded 523 times
Graupner Cirrus
I was hoping someone would be willing to create icons for the Graupner Cirrus below. It's hard to even find usable images of a 40 year old model.
Thanks in advance.
Thanks in advance.
-
- Posts: 13
- Joined: Sat Sep 27, 2014 1:00 am
- Country: -
Re: Graupner Cirrus
How does this look?Maguro wrote:I was hoping someone would be willing to create icons for the Graupner Cirrus below. It's hard to even find usable images of a 40 year old model.
Thanks in advance.
Best regards
- Attachments
-
- cirrus.zip
- This is the second upload. I think the first upload was at 256 bits graphic instead of 16.
- (5.09 KiB) Downloaded 499 times
Last edited by boomerwing on Thu Oct 16, 2014 2:55 am, edited 1 time in total.
Every project is just practice for the next one.
Re: Model Artwork for Taranis
I am looking for a model artwork for an A-10 Warthog.
Does somebody have this or make this?
Thanks in advance!
Does somebody have this or make this?
Thanks in advance!
Re: Model Artwork for Taranis
Boomerwing and Phillipp, thank you both. You help is much appreciated.
Roger
Roger
Re: Model Artwork for Taranis
The both A10 Warthog BMPs in the attached zip-file came preinstalled with my TARANIS in the BMP folder.
- Attachments
-
- BMP.zip
- (1.25 KiB) Downloaded 478 times
Re: Model Artwork for Taranis
Thanks a lot Infinity! Looks great
Re: Model Artwork for Taranis
Does somebody know where to find Art work for sailboats?
I am also looking for a MicroMagic artwork for the Taranis.
I am also looking for a MicroMagic artwork for the Taranis.
-
- Posts: 750
- Joined: Tue Dec 27, 2011 11:22 pm
- Country: United States
- Location: Carson City, Nv
Re: Model Artwork for Taranis
Sailboats are going to be tough to do and see anything.
The .bmp used for models are 64 pixels wide by 32 high. Sailboats are typically taller than they are on water/overall length. This means practically no detail of hull will show. At best you will have a rough idea of sail plan. Here is a quick job...done in Infraview.
The .bmp used for models are 64 pixels wide by 32 high. Sailboats are typically taller than they are on water/overall length. This means practically no detail of hull will show. At best you will have a rough idea of sail plan. Here is a quick job...done in Infraview.
Last edited by rdeanchurch on Sun Oct 19, 2014 9:26 pm, edited 1 time in total.
Dean
OldDmbThms: 1. Takeoff, 2. Crash, 3. Repair, GOTO 1
OldDmbThms: 1. Takeoff, 2. Crash, 3. Repair, GOTO 1
Re: Model Artwork for Taranis
Thank you rdeanchurch for the art work of the MicroMagic.
I copied it on the SD card of the Taranis and selected it at the model but somehow it doesn't appear on the screen
Could you be so kind to make a "new" model art for the MicroMagic?
Thanks in advance.
I copied it on the SD card of the Taranis and selected it at the model but somehow it doesn't appear on the screen
Could you be so kind to make a "new" model art for the MicroMagic?
Thanks in advance.
-
- Posts: 750
- Joined: Tue Dec 27, 2011 11:22 pm
- Country: United States
- Location: Carson City, Nv
Re: Model Artwork for Taranis
My bad, wrong format. SorryYihaaa wrote:Thank you rdeanchurch for the art work of the MicroMagic.
I copied it on the SD card of the Taranis and selected it at the model but somehow it doesn't appear on the screen
Could you be so kind to make a "new" model art for the MicroMagic?
Thanks in advance.
corrected attached. This time I tested it.
- Attachments
-
- McroMgic.zip
- (473 Bytes) Downloaded 479 times
Dean
OldDmbThms: 1. Takeoff, 2. Crash, 3. Repair, GOTO 1
OldDmbThms: 1. Takeoff, 2. Crash, 3. Repair, GOTO 1
Re: Model Artwork for Taranis
Great rdeanchurch Now it looks good
Thank you very much for your help, much appreciated!
Thank you very much for your help, much appreciated!