Manuals for 9XR Pro
Manuals for 9XR Pro
The following manuals cover versions of the ErSky9xr firmware up to r204 except for '9XR Pro: Ersky9x Explained' which is current to r202.(Edit 6th July 2014: All files are now current to r204) The initial batch of 9XR Pro radios have r202 version firmware installed. Updating the firmware is as easy as copying the updated firmware onto the SD card and then flashing it using the buttons on the radio. See "9XR Pro: Introduction to the Hardware". A revision for 9XR Pro: Ersky9x Explaned' to cover r204 will be posted when available soon. This revision will cover the 'Latch and 'Flip Flop functions plus the eight default voice switches in the Safety Switches menu.
If you have Ersky9x installed on a SkyNorth board then the manual 9XR Pro: Ersky9x Explained covers versions up to r202 also. (Edit 6th July 2014: Now up to r204)
Edit 6th June 2014: '9XR Pro: Using Voice with Ersky9x' has been revised to include the list of current voice files shipped with the 9XR Pro radio. The text has been altered to agree with the voice files listed in Appendix A. The URL for the Sound Pack Library has been added.
Edit 8th October 2014" "Appendix B: Hardware 8Oct2014" which covers using the 9XR Pro for more than 8 channels has been added to the list of manuals. This document is an appendix to "9XR Pro: Introduction to the Hardware" and should be read in conjunction with this document. I publish it separately here rather than included as a revision to the "9XR Pro:Introduction to the Hardware" manual so that it may be downloaded individually, is obviously an addition to the other manuals, and so that it may be treated and revised as an individual entity.
Edit 15th October 2014: Appendix B: Hardware12Oct2014 has been added. It is a revision by Daedalus66 which is highly appreciated. His clarity of expression adds immensely to the quality of the document.
Edit 6th January 2016: 9XR Pro Communicating with a Computer has been revised to include updated links to current firmware.
This file is mentioned in '9XR Pro: Communicating With A Computer'. We hope you will never need it:
Many thanks are due to Daedalus66 for his professional contributions and editing of these manuals. The quality is all his.
Steve
If you have Ersky9x installed on a SkyNorth board then the manual 9XR Pro: Ersky9x Explained covers versions up to r202 also. (Edit 6th July 2014: Now up to r204)
Edit 6th June 2014: '9XR Pro: Using Voice with Ersky9x' has been revised to include the list of current voice files shipped with the 9XR Pro radio. The text has been altered to agree with the voice files listed in Appendix A. The URL for the Sound Pack Library has been added.
Edit 8th October 2014" "Appendix B: Hardware 8Oct2014" which covers using the 9XR Pro for more than 8 channels has been added to the list of manuals. This document is an appendix to "9XR Pro: Introduction to the Hardware" and should be read in conjunction with this document. I publish it separately here rather than included as a revision to the "9XR Pro:Introduction to the Hardware" manual so that it may be downloaded individually, is obviously an addition to the other manuals, and so that it may be treated and revised as an individual entity.
Edit 15th October 2014: Appendix B: Hardware12Oct2014 has been added. It is a revision by Daedalus66 which is highly appreciated. His clarity of expression adds immensely to the quality of the document.
Edit 6th January 2016: 9XR Pro Communicating with a Computer has been revised to include updated links to current firmware.
This file is mentioned in '9XR Pro: Communicating With A Computer'. We hope you will never need it:
Many thanks are due to Daedalus66 for his professional contributions and editing of these manuals. The quality is all his.
Steve
Last edited by Mutchy on Wed Jan 06, 2016 7:34 am, edited 3 times in total.
- KAL
- Posts: 552
- Joined: Thu Oct 10, 2013 4:36 pm
- Country: Germany
- Location: somewhere near Rothenburg ob der Tauber
Re: Manuals for 9XR Pro
Wanted to collect all that is needed to use SAM-BA just for the case ...
But when I click the link to at91sam3s8-9xr.zip in "9XR Pro Using SAM-BA to restore bricked Tx 2014-02-12.pdf"
I get the message "You are not authorised to read this forum."
Where else can I get this file?
Klaus
But when I click the link to at91sam3s8-9xr.zip in "9XR Pro Using SAM-BA to restore bricked Tx 2014-02-12.pdf"
I get the message "You are not authorised to read this forum."
Where else can I get this file?
Klaus
( TH9X / 9XTreme / FrSky DHT / Spektrum / Multi / RotEnc )
( 9XR PRO / erSKY9x / FrSky DHT / Spektrum / Multi / RotEnc / P3 as Slider )
( 9XR PRO / erSKY9x / FrSky DHT / Spektrum / Multi / RotEnc / P3 as Slider )
Re: Manuals for 9XR Pro
For expediency It is here. Hope you never need it:)
Steve
Steve
- KAL
- Posts: 552
- Joined: Thu Oct 10, 2013 4:36 pm
- Country: Germany
- Location: somewhere near Rothenburg ob der Tauber
Re: Manuals for 9XR Pro
I hope so too,
but Murphy is always watching ...
Thank you
Klaus
but Murphy is always watching ...
Thank you
Klaus
( TH9X / 9XTreme / FrSky DHT / Spektrum / Multi / RotEnc )
( 9XR PRO / erSKY9x / FrSky DHT / Spektrum / Multi / RotEnc / P3 as Slider )
( 9XR PRO / erSKY9x / FrSky DHT / Spektrum / Multi / RotEnc / P3 as Slider )
Re: Manuals for 9XR Pro
I needed it twice.. Once when the bootloader was developed, and the second time I pushed the reset button on purpose while powering up the radio
Someone had to test if it works right? and if the manual was explaining it right too
João
Someone had to test if it works right? and if the manual was explaining it right too
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- KAL
- Posts: 552
- Joined: Thu Oct 10, 2013 4:36 pm
- Country: Germany
- Location: somewhere near Rothenburg ob der Tauber
Re: Manuals for 9XR Pro
Agree,
when there is a reset button there also will be somenone to press it ....
Klaus
when there is a reset button there also will be somenone to press it ....
Klaus
( TH9X / 9XTreme / FrSky DHT / Spektrum / Multi / RotEnc )
( 9XR PRO / erSKY9x / FrSky DHT / Spektrum / Multi / RotEnc / P3 as Slider )
( 9XR PRO / erSKY9x / FrSky DHT / Spektrum / Multi / RotEnc / P3 as Slider )
Re: Manuals for 9XR Pro
The difference is, I knew the consequences and saved everything before But you only really have a problem if you turn the radio on while pressing it.. Oooops, I have the feeling I shouldn't have said this
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Manuals for 9XR Pro
You are tempting fate......
At least you are close enough to be able to drive to each others place within a few hours......
Steve
At least you are close enough to be able to drive to each others place within a few hours......
Steve
Re: Manuals for 9XR Pro
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- KAL
- Posts: 552
- Joined: Thu Oct 10, 2013 4:36 pm
- Country: Germany
- Location: somewhere near Rothenburg ob der Tauber
Re: Manuals for 9XR Pro
Safety first! Often I have to deal with people don't making safety copys of their computer's harddrives.jhsa wrote:... I knew the consequences and saved everything before ...
So ev'rything is double saved. Important or interesting things I find in the infinite depths of space the web I make a
"safety copy" on my harddrives. Too often I found dead links ...
So I collect the things I possibly need before e.g. ATMEL doesn't provide SAM-BA any more ...
So ev'rything just for the case ...
And if the case takes place, you are mostly too nervous to collect all the things you need...
Klaus
( TH9X / 9XTreme / FrSky DHT / Spektrum / Multi / RotEnc )
( 9XR PRO / erSKY9x / FrSky DHT / Spektrum / Multi / RotEnc / P3 as Slider )
( 9XR PRO / erSKY9x / FrSky DHT / Spektrum / Multi / RotEnc / P3 as Slider )
- MikeB
- 9x Developer
- Posts: 18000
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Manuals for 9XR Pro
?? http://www.atmel.com/tools/atmelsam-bai ... ammer.aspx ??KAL wrote:So I collect the things I possibly need before e.g. ATMEL doesn't provide SAM-BA any more ...
Still seems to be there!
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Manuals for 9XR Pro
I think he meant to say " if atmel doesn't provide it anymore"
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- KAL
- Posts: 552
- Joined: Thu Oct 10, 2013 4:36 pm
- Country: Germany
- Location: somewhere near Rothenburg ob der Tauber
Re: Manuals for 9XR Pro
Exactly
( TH9X / 9XTreme / FrSky DHT / Spektrum / Multi / RotEnc )
( 9XR PRO / erSKY9x / FrSky DHT / Spektrum / Multi / RotEnc / P3 as Slider )
( 9XR PRO / erSKY9x / FrSky DHT / Spektrum / Multi / RotEnc / P3 as Slider )
-
- Posts: 149
- Joined: Thu Dec 29, 2011 10:04 pm
- Country: -
- Location: Ashbourne Co Meath
Re: Manuals for 9XR Pro
Ok, following this with interest, and just wondering,
Could someone post up a list of the software that would be needed from atmel, (and maybe even a list of other essentials) in order to be able to compile and load the source for the Pro series boards. I'm just getting up to speed on all of this, and between 2 of us, there are 2 9XR Pro TX's, and 3 Sky board 9X's (to be fitted), and a couple of 9X's that will remain "standard", so I think it makes sense to be able to look slightly more closely at what's going on, rather than just taking copies of the excellent work that Mike and others have done. Who knows, I might even get to the point where I might be able to make a useful contribution to things. Plan is to have a dedicated Win based machine that I can put just the RC radio work on, so that I can rely on the thing not being messed up by other activities in other areas.
Thanks
Steve
Could someone post up a list of the software that would be needed from atmel, (and maybe even a list of other essentials) in order to be able to compile and load the source for the Pro series boards. I'm just getting up to speed on all of this, and between 2 of us, there are 2 9XR Pro TX's, and 3 Sky board 9X's (to be fitted), and a couple of 9X's that will remain "standard", so I think it makes sense to be able to look slightly more closely at what's going on, rather than just taking copies of the excellent work that Mike and others have done. Who knows, I might even get to the point where I might be able to make a useful contribution to things. Plan is to have a dedicated Win based machine that I can put just the RC radio work on, so that I can rely on the thing not being messed up by other activities in other areas.
Thanks
Steve
Irish Steve
If it was easy, shure, would't we all be doin it?
_
If it was easy, shure, would't we all be doin it?
_
- MikeB
- 9x Developer
- Posts: 18000
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Manuals for 9XR Pro
From Atmel, you only need Sam-BA, and then only if you don't have the bootloader installed:
http://www.atmel.com/tools/atmelsam-bai ... ammer.aspx
For compiling, I'm currently using this:
http://sourceforge.net/projects/yagarto/
There are certainly newer versions of the compiler, and they may produce 'better' code, but like all these things this works so I haven't bothered to change it. The compiled code fits with plenty of space to spare.
Mike.
http://www.atmel.com/tools/atmelsam-bai ... ammer.aspx
For compiling, I'm currently using this:
http://sourceforge.net/projects/yagarto/
There are certainly newer versions of the compiler, and they may produce 'better' code, but like all these things this works so I haven't bothered to change it. The compiled code fits with plenty of space to spare.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
-
- Posts: 149
- Joined: Thu Dec 29, 2011 10:04 pm
- Country: -
- Location: Ashbourne Co Meath
Re: Manuals for 9XR Pro
Mike,
Many thanks for a very rapid reply again, it's appreciated, and I hope I will be in a position to do something to help before too long, no promises, i suspect I will have to do some serious work to get up to speed on this, from the discussions I've seen over time, it's not a simple piece of code.
Thanks
Steve
Many thanks for a very rapid reply again, it's appreciated, and I hope I will be in a position to do something to help before too long, no promises, i suspect I will have to do some serious work to get up to speed on this, from the discussions I've seen over time, it's not a simple piece of code.
Thanks
Steve
Irish Steve
If it was easy, shure, would't we all be doin it?
_
If it was easy, shure, would't we all be doin it?
_
- MikeB
- 9x Developer
- Posts: 18000
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Manuals for 9XR Pro
The code has just grown over time, and started out as er9x where some things were done just to make the code smaller so it fitted in the 64K of the Mega64A.
Every so often I try to improve the look of the source!
Mike.
Every so often I try to improve the look of the source!
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Manuals for 9XR Pro
Hi Mike
Sorry but I must be missing something somewhere. No matter what I do I can not compile ERSKY9X for use on the 9XRPro. I have tried on several Windows machines running WinXP through to Win7. I have installed YAGARTO on all. Not sure about the SAM-BA V2.12 install on the Win7 machine. Is SAM-BA a definite requirement for compiling?
My Win7 machine and XP box has no problems with bog standard ER9X but it will not compile OpenTX or ERSKY9X
My VIsta machine will compile ER9X and OpenTX but not ERSKY9X.
I get the following error message on both the Win7 and Vista machines
--------
D:\ERSKY9X\src>compile-win
D:\ERSKY9X\src>make clean
rm -f x9dobj/*.*
rm -f x9dpobj/*.*
rm -f skyobj/*.*
rm -f skyRobj/*.*
rm -f ersky9x_rom.elf
rm -f ersky9x_rom.map
rm -f ersky9x_rom.hex
rm -f core_cm3.c.bak board_lowlevel.c.bak crt.c.bak vectors_sam3s.c.bak port.c.b
ak coos.c.bak
rm -f core_cm3.lst board_lowlevel.lst crt.lst vectors_sam3s.lst port.lst coos.ls
t
rm -f core_cm3.lss board_lowlevel.lss crt.lss vectors_sam3s.lss port.lss coos.ls
s
rm -f
rm -f
rm -fR .dep
D:\ERSKY9X\src>make REVB=1 DEBUG=1 STAMP=1
Usage: egrep [OPTION]... PATTERN [FILE]...
Try `egrep --help' for more information.
c:\WinAVR-20100110\bin\cat.exe: .svn/entries: No such file or directory
Generate Version-stamp:
arm-none-eabi-gcc -c -mcpu=cortex-m3 -Os -gdwarf-2 -mthumb -fomit-frame-pointer
-Wall -Wstrict-prototypes -fverbose-asm -Dat91sam3s4 -DRUN_FROM_FLASH=1 -DPCBSK
Y -DSTAMP -DREVB -DFRSKY -DCPUARM -DDEBUG -MD -MP -MF skyobj/core_cm3.o.d -I .
-I./inc core_cm3.c -o skyobj/core_cm3.o
core_cm3.c:802:1: fatal error: opening dependency file skyobj/core_cm3.o.d: No s
uch file or directory
compilation terminated.
make: *** [skyobj/core_cm3.o] Error 1
-----------
Any help greatly appreciated
Thanks
Kevin
Sorry but I must be missing something somewhere. No matter what I do I can not compile ERSKY9X for use on the 9XRPro. I have tried on several Windows machines running WinXP through to Win7. I have installed YAGARTO on all. Not sure about the SAM-BA V2.12 install on the Win7 machine. Is SAM-BA a definite requirement for compiling?
My Win7 machine and XP box has no problems with bog standard ER9X but it will not compile OpenTX or ERSKY9X
My VIsta machine will compile ER9X and OpenTX but not ERSKY9X.
I get the following error message on both the Win7 and Vista machines
--------
D:\ERSKY9X\src>compile-win
D:\ERSKY9X\src>make clean
rm -f x9dobj/*.*
rm -f x9dpobj/*.*
rm -f skyobj/*.*
rm -f skyRobj/*.*
rm -f ersky9x_rom.elf
rm -f ersky9x_rom.map
rm -f ersky9x_rom.hex
rm -f core_cm3.c.bak board_lowlevel.c.bak crt.c.bak vectors_sam3s.c.bak port.c.b
ak coos.c.bak
rm -f core_cm3.lst board_lowlevel.lst crt.lst vectors_sam3s.lst port.lst coos.ls
t
rm -f core_cm3.lss board_lowlevel.lss crt.lss vectors_sam3s.lss port.lss coos.ls
s
rm -f
rm -f
rm -fR .dep
D:\ERSKY9X\src>make REVB=1 DEBUG=1 STAMP=1
Usage: egrep [OPTION]... PATTERN [FILE]...
Try `egrep --help' for more information.
c:\WinAVR-20100110\bin\cat.exe: .svn/entries: No such file or directory
Generate Version-stamp:
arm-none-eabi-gcc -c -mcpu=cortex-m3 -Os -gdwarf-2 -mthumb -fomit-frame-pointer
-Wall -Wstrict-prototypes -fverbose-asm -Dat91sam3s4 -DRUN_FROM_FLASH=1 -DPCBSK
Y -DSTAMP -DREVB -DFRSKY -DCPUARM -DDEBUG -MD -MP -MF skyobj/core_cm3.o.d -I .
-I./inc core_cm3.c -o skyobj/core_cm3.o
core_cm3.c:802:1: fatal error: opening dependency file skyobj/core_cm3.o.d: No s
uch file or directory
compilation terminated.
make: *** [skyobj/core_cm3.o] Error 1
-----------
Any help greatly appreciated
Thanks
Kevin
- MikeB
- 9x Developer
- Posts: 18000
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Manuals for 9XR Pro
Create a sub-directory "skyRobj" under the src directory (for the 'PRO').
The makefile keeps the object files for SKY, PRO and Taranis in separate sub-directories to avoid needing to re-compile for the different targets.
Also, for the 'PRO, add REVX=1 to the command line.
For the SKY board you need a directory 'skyobj', and for the Taranis you need a directory 'x9dobj'.
Mike.
The makefile keeps the object files for SKY, PRO and Taranis in separate sub-directories to avoid needing to re-compile for the different targets.
Also, for the 'PRO, add REVX=1 to the command line.
For the SKY board you need a directory 'skyobj', and for the Taranis you need a directory 'x9dobj'.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Manuals for 9XR Pro
Thanks Mike again for your quick reply. Yep things got a little further along but alas another error.
----------
REVX -DFRSKY -DCPUARM -DDEBUG -MD -MP -MF skyRobj/lcd.o.d -fno-exceptions -I . -
I./inc lcd.cpp -o skyRobj/lcd.o
lcd.cpp:43:29: fatal error: font_se_05x07.lbm: No such file or directory
compilation terminated.
make: *** [skyRobj/lcd.o] Error 1
D:\ERSKY9X\src>
---------------
Now I have found said beastie "font_se_05x07.lbm" hiding over in OpenTX directories. When I copied it to the ERSKY9X src directory and tried again another lbm font file was missing "font_fr_05x07.lbm". So I tried copying the fonts dir from OpenTX into the src dir (ersky9x/src/fonts) but that did not work.
Do I copy all the font files into the actual src directory for ERSKY9X??
Thanks in advance
Kevin
----------
REVX -DFRSKY -DCPUARM -DDEBUG -MD -MP -MF skyRobj/lcd.o.d -fno-exceptions -I . -
I./inc lcd.cpp -o skyRobj/lcd.o
lcd.cpp:43:29: fatal error: font_se_05x07.lbm: No such file or directory
compilation terminated.
make: *** [skyRobj/lcd.o] Error 1
D:\ERSKY9X\src>
---------------
Now I have found said beastie "font_se_05x07.lbm" hiding over in OpenTX directories. When I copied it to the ERSKY9X src directory and tried again another lbm font file was missing "font_fr_05x07.lbm". So I tried copying the fonts dir from OpenTX into the src dir (ersky9x/src/fonts) but that did not work.
Do I copy all the font files into the actual src directory for ERSKY9X??
Thanks in advance
Kevin
- MikeB
- 9x Developer
- Posts: 18000
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Manuals for 9XR Pro
Sorry, I sometimes forget to add new files to the repository.
Here are missing font files you will need, they will get added next time I do a commit. Just put them in your src directory.
While this is a pain for you, it is useful to pick up anything I've forgotten to do!
Mike.
Here are missing font files you will need, they will get added next time I do a commit. Just put them in your src directory.
While this is a pain for you, it is useful to pick up anything I've forgotten to do!
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Manuals for 9XR Pro
HI Mike
Thanks for that. Not a pain at all. You guys always come through with the goods. Will give font up and see how it goes
Cheers
Kevin G
Thanks for that. Not a pain at all. You guys always come through with the goods. Will give font up and see how it goes
Cheers
Kevin G
Re: Manuals for 9XR Pro
Hey Mike - me again
Compiling is now a success. However I have come across a few other issues that I got you to fix ages ago for ER9X and the same have reappeared here with sky.
Both have to do with an edit of the en.h file. The first is renaming of the sticks. They are renamed in the en.h file
#define ISTR_STICK_NAMES
However, they are not renamed in firmware after compiling. I think last time I had to add an include somewhere I forget.
Second and again the same thing happened a while ago with ER9X - the template names are renamed in en.h but not in the firmware.
Is there a specific forum topic for issues such as these that are related to editing and compiling?
Cheers
Kevin
Compiling is now a success. However I have come across a few other issues that I got you to fix ages ago for ER9X and the same have reappeared here with sky.
Both have to do with an edit of the en.h file. The first is renaming of the sticks. They are renamed in the en.h file
#define ISTR_STICK_NAMES
However, they are not renamed in firmware after compiling. I think last time I had to add an include somewhere I forget.
Second and again the same thing happened a while ago with ER9X - the template names are renamed in en.h but not in the firmware.
Is there a specific forum topic for issues such as these that are related to editing and compiling?
Cheers
Kevin
- MikeB
- 9x Developer
- Posts: 18000
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Manuals for 9XR Pro
Probably the best topic is this one: viewtopic.php?f=7&t=40.
I'll have a look at those two items later today.
Mike.
Edit: These are partly related to the multi-language support.
I'll have a look at those two items later today.
Mike.
Edit: These are partly related to the multi-language support.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
-
- Posts: 7
- Joined: Fri Jan 23, 2015 12:52 pm
- Country: -
Re: Manuals for 9XR Pro
I just bought Turnigy 9xr pro. I got version ersky9x-r204 (v.4-Mike)-date 11.5.2014.
Is there a newer version of firmware?
Where can I find it?
Please help.
Sorry for my bad english. I am from Slo.
Best regards
Is there a newer version of firmware?
Where can I find it?
Please help.
Sorry for my bad english. I am from Slo.
Best regards
Re: Manuals for 9XR Pro
Hi Majstoralc.
There are later versions of the firmware however the manuals and the beta testing all finished at the version r204 which you have. While there are some very smart features that Mike and the rest of the development team, Joao in particular, have been working on, you will have to follow the Ersky9x firmware development threads here on RC groups to keep up with the changes and any faults (bugs) in the firmware. I have been using Ersky9x firmware r204 in four transmitters (two 9XR Pro and two Sky9x home made transmitters for well over a year now. It is rock solid and the manuals are current up to this release of the firmware.
I fly F5B gliders, FPV and sport aerobatic planes float planes and quadcopter aircraft. I have not used this release for helicopters so can not vouch for the usability and reliability for them but for the rest I believe the firmware is the most user friendly available today - better than the Taranis r208 which I also use.
Steve
There are later versions of the firmware however the manuals and the beta testing all finished at the version r204 which you have. While there are some very smart features that Mike and the rest of the development team, Joao in particular, have been working on, you will have to follow the Ersky9x firmware development threads here on RC groups to keep up with the changes and any faults (bugs) in the firmware. I have been using Ersky9x firmware r204 in four transmitters (two 9XR Pro and two Sky9x home made transmitters for well over a year now. It is rock solid and the manuals are current up to this release of the firmware.
I fly F5B gliders, FPV and sport aerobatic planes float planes and quadcopter aircraft. I have not used this release for helicopters so can not vouch for the usability and reliability for them but for the rest I believe the firmware is the most user friendly available today - better than the Taranis r208 which I also use.
Steve
-
- Posts: 7
- Joined: Fri Jan 23, 2015 12:52 pm
- Country: -
Re: Manuals for 9XR Pro
Thanks for your reply.
I find this upgrade features, but I do not know how can i use and upgrade my firmware.:
https://code.google.com/p/ersky9x/source/list
Can you please help me
Can you please explain me what is this update features and how can i install them?
Best regards
I find this upgrade features, but I do not know how can i use and upgrade my firmware.:
https://code.google.com/p/ersky9x/source/list
Can you please help me
Can you please explain me what is this update features and how can i install them?
Best regards
- MikeB
- 9x Developer
- Posts: 18000
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Manuals for 9XR Pro
You need to flash the file ersky9xr.bin. The latest one committed on googlecode is here: https://code.google.com/p/ersky9x/sourc ... vn%2Ftrunk.
Later versions, not yet committed, are on this post: viewtopic.php?f=7&t=4676.
The manuals above describe the process to flash these.
Mike.
Later versions, not yet committed, are on this post: viewtopic.php?f=7&t=4676.
The manuals above describe the process to flash these.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
-
- Posts: 1844
- Joined: Tue Dec 27, 2011 8:22 pm
- Country: -
- Location: Ottawa
Manuals for 9XR Pro -- Here they are!
Just giving this item a bump to make sure it's easily found.
For those using updated versions of the Ersky9x firmware, a guide to the new menu structure is here:
viewtopic.php?f=123&t=6810
Now that the flying season is coming to an end, I will get back to updating the Ersky9x Explained, but in the meantime the combination of the earlier manual and this guide covers what most people need.
For those using updated versions of the Ersky9x firmware, a guide to the new menu structure is here:
viewtopic.php?f=123&t=6810
Now that the flying season is coming to an end, I will get back to updating the Ersky9x Explained, but in the meantime the combination of the earlier manual and this guide covers what most people need.
-
- Posts: 1844
- Joined: Tue Dec 27, 2011 8:22 pm
- Country: -
- Location: Ottawa
Re: Manuals for 9XR Pro
Another bump