Turnigy rxs?
-
- Posts: 24
- Joined: Sat Feb 11, 2012 7:38 am
- Country: -
- Location: Cleveleys, Lancashire
Turnigy rxs?
I was just thinking ( a rare occurance).
If most of you are changing over from the Turnigy/Flysky/Imax to your rf module then that means that must all have spare Turnigy/Flysky/Imax receivers that you don't need. Wanna sell them to me for very little?
If most of you are changing over from the Turnigy/Flysky/Imax to your rf module then that means that must all have spare Turnigy/Flysky/Imax receivers that you don't need. Wanna sell them to me for very little?
Turnigy rxs?
Wanna have 3 (soon 4)? You can have it for Free. You pay the postage. My Location is Switzerland. PM me if Interesses.
manu
manu
-
- Posts: 24
- Joined: Sat Feb 11, 2012 7:38 am
- Country: -
- Location: Cleveleys, Lancashire
Re: Turnigy rxs?
PM sent!
- cre8tiveleo
- Posts: 1434
- Joined: Tue Dec 27, 2011 6:13 pm
- Country: -
- Location: Ontario,(GTA North)
- Contact:
Re: Turnigy rxs?
I kept two of mine as Turnigy radios. I want 8ch + compatibility. Dsm only gives you 6 right now. Poopy.
I like the Turnigy stuff, much farther range than the Spektrum. Jut picked up a whole bunch of micro 5-in-1 boards that are turnigy compatibly, they fit the Flyzone Albitross, dr.1, the parkzone ultra micros, great for converting them all over.
I like the Turnigy stuff, much farther range than the Spektrum. Jut picked up a whole bunch of micro 5-in-1 boards that are turnigy compatibly, they fit the Flyzone Albitross, dr.1, the parkzone ultra micros, great for converting them all over.
Turnigy rxs?
Do you have a link to the 5in1 Turnigy boards?
- cre8tiveleo
- Posts: 1434
- Joined: Tue Dec 27, 2011 6:13 pm
- Country: -
- Location: Ontario,(GTA North)
- Contact:
Turnigy rxs?
They are the hk micro heli boards. I'll post link when i get home
---
I am here: http://tapatalk.com/map.php?kyawmy
---
I am here: http://tapatalk.com/map.php?kyawmy
- cre8tiveleo
- Posts: 1434
- Joined: Tue Dec 27, 2011 6:13 pm
- Country: -
- Location: Ontario,(GTA North)
- Contact:
- cre8tiveleo
- Posts: 1434
- Joined: Tue Dec 27, 2011 6:13 pm
- Country: -
- Location: Ontario,(GTA North)
- Contact:
Re: Turnigy rxs?
I would be interested in RX and TX modules for the stock radio link as well. In part to experiment with homebrew radio stuff ..
Re: Turnigy rxs?
What's the difference between the different 5 in 1 modules?
Reinhard
Reinhard
- cre8tiveleo
- Posts: 1434
- Joined: Tue Dec 27, 2011 6:13 pm
- Country: -
- Location: Ontario,(GTA North)
- Contact:
Turnigy rxs?
Not sure what the differences are, maybe servo throw? I need a few more, so i'll order 1 of each this time. Maybe they're all the same? Dont know.
---
I am here: http://tapatalk.com/map.php?zao2ga
---
I am here: http://tapatalk.com/map.php?zao2ga
Re: Turnigy rxs?
If someone has some leftover turnigy 9x transmitter modules, and also receivers, I would be glad to take them off their hands (Please be from EU)...
I need them to try an arduino project, to try and interface the turnigy 9x transmitter module with an arduino...I'll need some help from the experts from the 9x forums soon .
I need them to try an arduino project, to try and interface the turnigy 9x transmitter module with an arduino...I'll need some help from the experts from the 9x forums soon .