Another run planned?
-
- Posts: 15
- Joined: Tue Feb 28, 2012 10:26 pm
- Country: -
Another run planned?
I was too late! I didn't get on it fast enough and now V3.0 is sold out. Is there any plans to make more?
Last edited by digiexchris on Fri Feb 01, 2013 9:51 pm, edited 1 time in total.
Re: Another run planned?
I'd also like to know the answer to this.
I was planning on buying a board, rotary encoder, LCD upgrade and switching regulators some time in the not to distant future when I get my FrSky module
I was planning on buying a board, rotary encoder, LCD upgrade and switching regulators some time in the not to distant future when I get my FrSky module
Re: Another run planned?
I'd also love to see another run. I was planning on getting a board, LCD and rotary knob once my FrSky gear came in
Re: Another run planned?
I have a few boards left over to debug , and see It I can get them working.
No , I do not plan to run another batch of boards .. there is not enough interest for me to run another 100 or so boards.
I'm working on a Mini - SKY board , but its no where close to being plug and play like the old one for the 9x
-Brent
No , I do not plan to run another batch of boards .. there is not enough interest for me to run another 100 or so boards.
I'm working on a Mini - SKY board , but its no where close to being plug and play like the old one for the 9x
-Brent
Re: Another run planned?
Damn, if you can get one of the remaining boards working I'd love to have it with a screen and switching regulators, a telemetry cable and if you can get more rotary switches, or point me to a source it'd be much appreciatedSkyNorth wrote:I have a few boards left over to debug , and see It I can get them working.
No , I do not plan to run another batch of boards .. there is not enough interest for me to run another 100 or so boards.
I'm working on a Mini - SKY board , but its no where close to being plug and play like the old one for the 9x
-Brent
- Rob Thomson
- Site Admin
- Posts: 4543
- Joined: Tue Dec 27, 2011 11:34 am
- Country: United Kingdom
- Location: Albury, Guildford
- Contact:
Re: Another run planned?
Guess the issue here is.... will the X9DA be a success?
If it is good.. then few people will go the Sky9X route
If it is good.. then few people will go the Sky9X route
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
Re: Another run planned?
Just re-read Brent's reply, and I'm not sure if by debug he means boards that have an issue, or boards he wants to keep to test issues that may be reported
Re: Another run planned?
Is April still the anticipated availability date for the X9DA. What's the latest guess on the price, do you know?
Ted
Ted
- Rob Thomson
- Site Admin
- Posts: 4543
- Joined: Tue Dec 27, 2011 11:34 am
- Country: United Kingdom
- Location: Albury, Guildford
- Contact:
Re: Another run planned?
Last i heard it was.
Sent from my GT-I9300 using Tapatalk 2
Sent from my GT-I9300 using Tapatalk 2
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
Re: Another run planned?
Any time scale for the next batch and how much are the boards?
Re: Another run planned?
As Brent said, there isn't going to be another batchSkyNorth wrote:I have a few boards left over to debug , and see It I can get them working.
No , I do not plan to run another batch of boards .. there is not enough interest for me to run another 100 or so boards.
I'm working on a Mini - SKY board , but its no where close to being plug and play like the old one for the 9x
-Brent
Re: Another run planned?
I do not have the funds currently to do another run. ( I still have to pay for the last run)
I have about 15 boards that I still need to work on.
Due to production problems , the board yield was down about 25 boards on the last run .....I have the parts but no boards...
So I'm out about $2500 , in lost sales/profit...thats a lot of hobby money....
If there is enough people in the group , that want to get together ,and fund another board run , then more boards could be run,
and divided among the investors.
So if you want the SKY9x board to live , then its time to step up , as I simply cannot afford to do another run on my own.
-Brent
I have about 15 boards that I still need to work on.
Due to production problems , the board yield was down about 25 boards on the last run .....I have the parts but no boards...
So I'm out about $2500 , in lost sales/profit...thats a lot of hobby money....
If there is enough people in the group , that want to get together ,and fund another board run , then more boards could be run,
and divided among the investors.
So if you want the SKY9x board to live , then its time to step up , as I simply cannot afford to do another run on my own.
-Brent
Re: Another run planned?
Have you thought about opening a Kickstarter or Indiegogo project? That's just one idea.
The other is that I'm making quite some nice progress with my UAV groundstation project which - if you remember - I wanna base the RC part on your board. I think, your board is way too good to see it just as an enhancement for the 9x. You should start marketing it more universally as a DIY-kit to build an own TX. A great and powerful board (with an ARM Cortex µP, after all...) plus feature-rich and mature software (Open9x)... Basically, you'd only have to take cables for connecting pots and switches and stuff into your program and adapter-boards for JR and Futaba modules.
I am posting regular progress reports on my UAV GCS project on DIY-Drones and the interest is substantial. I was anyways planning to do a post about your board somewhen soon.
Besides, I found the (Chinese) manufacturer where Servocity gets it's 3D-gimbals from and they make pretty good prices - another thing that could be worth thinking about.
And I am ready to order a board now if you have one!
Edit:
Posted a blog post about this to DIY-Drones.
Edit2:
http://diydrones.com/profiles/blogs/sky ... -dying-out
The other is that I'm making quite some nice progress with my UAV groundstation project which - if you remember - I wanna base the RC part on your board. I think, your board is way too good to see it just as an enhancement for the 9x. You should start marketing it more universally as a DIY-kit to build an own TX. A great and powerful board (with an ARM Cortex µP, after all...) plus feature-rich and mature software (Open9x)... Basically, you'd only have to take cables for connecting pots and switches and stuff into your program and adapter-boards for JR and Futaba modules.
I am posting regular progress reports on my UAV GCS project on DIY-Drones and the interest is substantial. I was anyways planning to do a post about your board somewhen soon.
Besides, I found the (Chinese) manufacturer where Servocity gets it's 3D-gimbals from and they make pretty good prices - another thing that could be worth thinking about.
And I am ready to order a board now if you have one!
Edit:
Posted a blog post about this to DIY-Drones.
Edit2:
http://diydrones.com/profiles/blogs/sky ... -dying-out
Re: Another run planned?
I hope this is not the end. Increase the price if it helps.
I want one...
Interesting. Would you care to share?sgofferj wrote: Besides, I found the (Chinese) manufacturer where Servocity gets it's 3D-gimbals from and they make pretty good prices - another thing that could be worth thinking about.
I want one...
Re: Another run planned?
Nice looking joysticks. Which one fits the case?
Re: Another run planned?
I don't know. I'm not modding my 9x, I'm building a new one .
Brent, check the DIY-Drones post! Some people are already stating interest!
Brent, check the DIY-Drones post! Some people are already stating interest!
-
- Posts: 241
- Joined: Tue Jan 15, 2013 9:41 pm
- Country: -
Re: Another run planned?
I'd like to second that thought. There was a guy on this forum goes by 'muchy' who made a beautiful tray. Maybe we could get him to pop some more cases out of his molds and get a group SKYTX9 or some such project happening and a group buy of some boards?sgofferj wrote:Have you thought about opening a Kickstarter or Indiegogo project? That's just one idea.
The other is that I'm making quite some nice progress with my UAV groundstation project which - if you remember - I wanna base the RC part on your board. I think, your board is way too good to see it just as an enhancement for the 9x. You should start marketing it more universally as a DIY-kit to build an own TX. A great and powerful board (with an ARM Cortex µP, after all...) plus feature-rich and mature software (Open9x)... Basically, you'd only have to take cables for connecting pots and switches and stuff into your program and adapter-boards for JR and Futaba modules.
I am posting regular progress reports on my UAV GCS project on DIY-Drones and the interest is substantial. I was anyways planning to do a post about your board somewhen soon.
Besides, I found the (Chinese) manufacturer where Servocity gets it's 3D-gimbals from and they make pretty good prices - another thing that could be worth thinking about.
And I am ready to order a board now if you have one!
Edit:
Posted a blog post about this to DIY-Drones.
Edit2:
http://diydrones.com/profiles/blogs/sky ... -dying-out
Joe
- Rob Thomson
- Site Admin
- Posts: 4543
- Joined: Tue Dec 27, 2011 11:34 am
- Country: United Kingdom
- Location: Albury, Guildford
- Contact:
Re: Another run planned?
If I could get a case.... I would 100% build a tx from the ground up.
Always the case (and lack of skill in that area) that stops me.
Sent from my GT-I9300 using Tapatalk 2
Always the case (and lack of skill in that area) that stops me.
Sent from my GT-I9300 using Tapatalk 2
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
-
- Posts: 241
- Joined: Tue Jan 15, 2013 9:41 pm
- Country: -
Re: Another run planned?
Here's the thread (sorry it was on RCGroups and the user is Mutchy.) Check out this awesome home made tray.
http://www.rcgroups.com/forums/showthread.php?t=1678570
http://www.rcgroups.com/forums/showthread.php?t=1678570
Re: Another run planned?
Well, 2 thoughts on this...Rob Thomson wrote:If I could get a case.... I would 100% build a tx from the ground up.
Always the case (and lack of skill in that area) that stops me.
1.) Think out of the box! Literally... . Who says, a TX must be in a traditional TX case. Google for "Handheld enclosure". The case I chose for my ground control station is a desktop enclosure by OKW (http://www.okw.com/OPD-WebSite/B4030117 ... roduct.okw). It's probably not good for a classic handheld TX but it's huge, so all my stuff will fit in.
2.) Be creative! Draw your idea of a perfect enclosure and then find someone who 3D-prints it for you. Come to DIY-Drones! We have many people with 3D-Printers in the community and many people with "let's do it"-attitude!
Re: Another run planned?
Besides, FrSky is coming with 18 channel TX modules and fitting receivers soon... Think about what an INSANE TX you/we could build with a SKY9X-board, one of the new FrSky-modules and Open9X... Just find some cool sticks, like those 4D-sticks I digged out and you can fly 2 planes at the same time with 1 TX xD.
-
- Posts: 1
- Joined: Sun Feb 10, 2013 5:10 pm
- Country: -
Re: Another run planned?
$2500 in the hole? ouch!!!
I would also suggest Kickstarter, or better IndieGogo (you keep whatever is donated) or Tindie Fundraiser.
So, what happened if I may ask? Why can't you get your money back from the board fab house? How does one go about dodging such a big issue in the future?
I think if there were an easy way to pre-order, people would help out.
Michael
I would also suggest Kickstarter, or better IndieGogo (you keep whatever is donated) or Tindie Fundraiser.
So, what happened if I may ask? Why can't you get your money back from the board fab house? How does one go about dodging such a big issue in the future?
I think if there were an easy way to pre-order, people would help out.
Michael
- Wimh
- Posts: 82
- Joined: Wed Dec 28, 2011 1:41 pm
- Country: Belgium
- Location: Vliermaal, Belgium
- Contact:
Re: Another run planned?
I bought a second hand SanwaRob Thomson wrote:If I could get a case.... I would 100% build a tx from the ground up.
Always the case (and lack of skill in that area) that stops me.
Sent from my GT-I9300 using Tapatalk 2
Won't be using the buttons down below, only up top. "Only" real problem so far is display. I want to find a small one fitting in there that will work with the original board. Because I decided to put the SKY9X board I got from Kaos in my MPX Evo case... Hoping I can use the original MPX display in there as well...
Wim
Belgium
Belgium
Re: Another run planned?
Brent - how is it possible to transfer some donations to help out with this problem of $2500? I think all of us, who are using and enjoying the board will do so.
Re: Another run planned?
Is there any market for used boards?
Demand and supply, market forces - you know. We can talk prices...
Demand and supply, market forces - you know. We can talk prices...
-
- Posts: 15
- Joined: Tue Feb 28, 2012 10:26 pm
- Country: -
Re: Another run planned?
absolutely, I'd be all over a used board. prefer within Canada to keep shipping down but would make exceptions
Re: Another run planned?
Haha, I was talking from a buyers point of view as well.
-
- Posts: 15
- Joined: Tue Feb 28, 2012 10:26 pm
- Country: -
Re: Another run planned?
heh I suspect there's not a lot of people out there selling, they like the boards too much!
Re: Another run planned?
Whoa! I've been out of the loop for a few months. Oh man, I sitting here and I'm having a hard
time coming to grips with this news...it's not good. I for one love this board, it's a power house.
Everyone was chewing their arms and legs off to get at the 9XR and as far as I can see it's just
ugly looking junk with the ONLY redeeming quality being it has er9x on it.
I'm at a loss for for words.
time coming to grips with this news...it's not good. I for one love this board, it's a power house.
Everyone was chewing their arms and legs off to get at the 9XR and as far as I can see it's just
ugly looking junk with the ONLY redeeming quality being it has er9x on it.
I'm at a loss for for words.