Voice files for 9XR-PRO with ersky9x
-
- Posts: 238
- Joined: Tue Dec 25, 2018 3:19 am
- Country: United States
Re: Voice files for 9XR-PRO with ersky9x
Thanks so much..That fixed it .I also had to add a few other things to root directory .I thought that when I flashed the firmware that it included all sub-directories ..It is fixed now and working
Re: Voice files for 9XR-PRO with ersky9x
I also had some problem (I not exactly remember what cause that) until Multi.txt was missing.
I deleted that file now and tested d2, d3 and both o.k. no matter with or without the file.
It's mean Mike developed something with that. (He always want the 100% perfect, half solutions are not accepted... )
I finally copied back to the SD again, because a bit later I want to order a multi-protocol module, so it will be useful to me.
The problem was without Multi.txt on the SD Card had a boot issue, but just with 222d1 firmware.
I deleted that file now and tested d2, d3 and both o.k. no matter with or without the file.
It's mean Mike developed something with that. (He always want the 100% perfect, half solutions are not accepted... )
I finally copied back to the SD again, because a bit later I want to order a multi-protocol module, so it will be useful to me.
Last edited by budavaril on Wed Feb 06, 2019 3:47 pm, edited 2 times in total.
-
- Posts: 238
- Joined: Tue Dec 25, 2018 3:19 am
- Country: United States
Re: Voice files for 9XR-PRO with ersky9x
Thank you budavaril ...It all works ..
Re: Voice files for 9XR-PRO with ersky9x
Ok, want to know another not so known feature of ErSky9x?
Do you like music?
I like to listen to music when I fly my models sometimes, or at least in between flights. Sometimes I am alone at the field and music is always a good company.
Did you know Ersky9x has a music player??
João
Do you like music?
I like to listen to music when I fly my models sometimes, or at least in between flights. Sometimes I am alone at the field and music is always a good company.
Did you know Ersky9x has a music player??
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
-
- Posts: 238
- Joined: Tue Dec 25, 2018 3:19 am
- Country: United States
Re: Voice files for 9XR-PRO with ersky9x
How do you load it ?
Re: Voice files for 9XR-PRO with ersky9x
viewtopic.php?f=7&t=40&p=115846&hilit=play#p115779
viewtopic.php?f=123&t=11330&p=139257&hi ... ic#p139257
viewtopic.php?f=7&t=40&p=125542&hilit=e ... ic#p125542
viewtopic.php?f=123&t=9300&p=120147&hil ... ic#p120147
João
viewtopic.php?f=123&t=11330&p=139257&hi ... ic#p139257
viewtopic.php?f=7&t=40&p=125542&hilit=e ... ic#p125542
viewtopic.php?f=123&t=9300&p=120147&hil ... ic#p120147
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Voice files for 9XR-PRO with ersky9x
Where can I find a current video/step by step instructions on programming sounds for switches etc. for vs r221?
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: Voice files for 9XR-PRO with ersky9x
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
Re: Voice files for 9XR-PRO with ersky9x
I recently came across some WAV files in an OpenTx script package, which include extra flight modes and other messages I needed, so I copied them to the user folder.
I noticed that the stock WAV files were 16000 hz so assumed that the extra files which were 32000 would not work. To my surprise they worked just fine. However, any file name > 8 chars do not work, so I will need to abbreviate them.
Also after adding the extra files (100+) to the user folder, they appear in the listing of files after the original files i.e. not in alphabetical order. Plus the new files appear in a random order. Is there a trick to get the entire collection sorted correctly?
I noticed that the stock WAV files were 16000 hz so assumed that the extra files which were 32000 would not work. To my surprise they worked just fine. However, any file name > 8 chars do not work, so I will need to abbreviate them.
Also after adding the extra files (100+) to the user folder, they appear in the listing of files after the original files i.e. not in alphabetical order. Plus the new files appear in a random order. Is there a trick to get the entire collection sorted correctly?
S500 + Pixhawk 1 clone + Mauch PM + C&T Telemetry adapter + 9XR-Pro (Taranis gimbals)/XJT/X8R
Re: Voice files for 9XR-PRO with ersky9x
Not sure. Try opening the card on a computer, and then put it back on the radio.
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Voice files for 9XR-PRO with ersky9x
By the way, you can generate your own voice files for Ersky9x using "TTSAutomate", which is a windows program that was designed specially for this..
viewtopic.php?f=7&t=7715
João
viewtopic.php?f=7&t=7715
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Voice files for 9XR-PRO with ersky9x
If I remember correctly, it was said, the files are displayed in the sequence, they have been written onto the card.
Reinhard
Reinhard
Re: Voice files for 9XR-PRO with ersky9x
I created a new folder on the PC and copied all the user voice files to it. Then I deleted the user folder on the SD card and copied the entire folder from the PC back to the SD card.
Now the files were in the correct order.
Then I renamed a file on the SD card on the PC. On viewing the list of voice files on the radio, the file I renamed was the last file in the listing. This indicates that the radio firmware code is not sorting the files prior to display.
Now the files were in the correct order.
Then I renamed a file on the SD card on the PC. On viewing the list of voice files on the radio, the file I renamed was the last file in the listing. This indicates that the radio firmware code is not sorting the files prior to display.
S500 + Pixhawk 1 clone + Mauch PM + C&T Telemetry adapter + 9XR-Pro (Taranis gimbals)/XJT/X8R
Re: Voice files for 9XR-PRO with ersky9x
No it doesn't. That is why I suggested to deal with it on the PC
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- MikeB
- 9x Developer
- Posts: 18000
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Voice files for 9XR-PRO with ersky9x
erskyTx certainly doesn't sort the filenames. To do so would need a relatively large amount of RAM as the entire directory would need to be read and then sorted before displaying. On radios such as the original SKY board, AR9X and 9XR-PRO, there isn't so much RAM available.
I might be able to do something for STM based radios, possibly only for directories with a limited number of files, which probably won't include some of the voice file directories!
Mike
I might be able to do something for STM based radios, possibly only for directories with a limited number of files, which probably won't include some of the voice file directories!
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Voice files for 9XR-PRO with ersky9x
I am good with it as it is Mike.. it just takes some more "looking" to find the files.. I think you could use the RAM in much more useful stuff than organizing voice files.. I really don't think that is a show stopper.. as long as the files are displayed I am happy
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Voice files for 9XR-PRO with ersky9x
Now at least we have a workaround for the RAM limitation by building a new folder on a PC to replace the original one.
Fortunately, the voice files are relatively stable.
Fortunately, the voice files are relatively stable.
S500 + Pixhawk 1 clone + Mauch PM + C&T Telemetry adapter + 9XR-Pro (Taranis gimbals)/XJT/X8R
-
- Posts: 11
- Joined: Sun Jul 26, 2020 5:13 pm
- Country: Brazil
Re: Voice files for 9XR-PRO with ersky9x
Hello guys, I updated my radio turnigy 9x r pro with the er9x r222, and now there is no sound from the models, example I have one on 0277 I put it on the spot and there is no sound, does anyone know how to do it, thanks
- MikeB
- 9x Developer
- Posts: 18000
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Voice files for 9XR-PRO with ersky9x
No sounds at all?
Are you using numbered files?
Mike
Are you using numbered files?
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: Voice files for 9XR-PRO with ersky9x
Also some more info here,
if you were using a very old firmware version, you will need to update your sound files and program them into each model eeprom:
https://www.youtube.com/playlist?list=P ... fxUB5C-mpr
and maybe this too:
https://openrcforums.com/forum/viewtopic.php?f=7&t=7715
if you were using a very old firmware version, you will need to update your sound files and program them into each model eeprom:
https://www.youtube.com/playlist?list=P ... fxUB5C-mpr
and maybe this too:
https://openrcforums.com/forum/viewtopic.php?f=7&t=7715
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
-
- Posts: 11
- Joined: Sun Jul 26, 2020 5:13 pm
- Country: Brazil
Re: Voice files for 9XR-PRO with ersky9x
Other sounds remain normal
I have 07 models installed with voice, the problem is creating a new name with new sound, after updating r222
When I upgraded to er9x r222, I can't get a name on a new model, for example 0277 is a name, that name put in the voice does not come out, the other old ones work normally, before the update the numbers linked to the name appeared in the configuration, not now, but the voice continues
- MikeB
- 9x Developer
- Posts: 18000
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Voice files for 9XR-PRO with ersky9x
The model name voice files are now stored in a directory /voice/modelNames on the SD card. It changed to this at some point.
Try:
Create that directory on the SD card if it doesn't exist.
Copy or move your model name voice files into that directory. Optionally change the name from a number to a more meaningful name (max 8 characters).
Start the radio normally.
Navigate to the model setup/general menu and go to the voice name entry. Press MENU LONG and you should see a list of the available files, just select the one you need with a long press of MENU (a short press of MENU should play the file).
Mike
Try:
Create that directory on the SD card if it doesn't exist.
Copy or move your model name voice files into that directory. Optionally change the name from a number to a more meaningful name (max 8 characters).
Start the radio normally.
Navigate to the model setup/general menu and go to the voice name entry. Press MENU LONG and you should see a list of the available files, just select the one you need with a long press of MENU (a short press of MENU should play the file).
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: Voice files for 9XR-PRO with ersky9x
pedroguimaraes, see here if you need more info: https://openrcforums.com/forum/viewtopi ... 34#p116982
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
-
- Posts: 11
- Joined: Sun Jul 26, 2020 5:13 pm
- Country: Brazil
Re: Voice files for 9XR-PRO with ersky9x
MikeB wrote: ↑Mon Jul 27, 2020 2:14 pm The model name voice files are now stored in a directory /voice/modelNames on the SD card. It changed to this at some point.
Try:
Create that directory on the SD card if it doesn't exist.
Copy or move your model name voice files into that directory. Optionally change the name from a number to a more meaningful name (max 8 characters).
Start the radio normally.
Navigate to the model setup/general menu and go to the voice name entry. Press MENU LONG and you should see a list of the available files, just select the one you need with a long press of MENU (a short press of MENU should play the file).
Mike
Thank you very much it worked
Pedro
-
- Posts: 11
- Joined: Sun Jul 26, 2020 5:13 pm
- Country: Brazil
Re: Voice files for 9XR-PRO with ersky9x
bob195558 wrote: ↑Mon Jul 27, 2020 4:25 pm pedroguimaraes, see here if you need more info: https://openrcforums.com/forum/viewtopi ... 34#p116982
Thank you very much it worked
Pedro