eepSKYe
- MikeB
- 9x Developer
- Posts: 17996
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: eepSKYe
João: I assume you mean printing, not displaying!
Peter M: Yes, please do post problems.
Mike
Peter M: Yes, please do post problems.
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: eepSKYe
What I meant above was that there were other issues that required much more attention than printing.. Issues that affect the functionality of eepskye and Ersky9x. I remember seeing this problem before, but I didn't report it because at the time Mike was trying to solve some other problem that was much more important. Then I just forgot..
I didn't mean to say that it shouldn't be fixed, but if there are other problems to be solved, I believe this wouldn't be at the top of the list
My 2 cents of course
João
I didn't mean to say that it shouldn't be fixed, but if there are other problems to be solved, I believe this wouldn't be at the top of the list
My 2 cents of course
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: eepSKYe
Yes, the logical switch problem I reported above is when we open the printing screen..
Thanks
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: eepSKYe
Mike, what about if we could also program the voice in eepskye and actually hear on the PC what we are programming? That would need a "Voice" folder somewhere, probably in the eepe directory? This could of course be extended to eepe..
Thanks
João
Thanks
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- MikeB
- 9x Developer
- Posts: 17996
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: eepSKYe
I made a bit of a start to this some time ago. When you run the simulator, you should see the word "WELCOME" appear on the "BEEP" button. This is actually the filename of a voice file. I did have the PC playing that one voice file, but found it too much every time I ran the simulator!
Mike
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: eepSKYe
I think that at least the VA's could be simulated.. probably we could create some simulated telemetry events so we could also program alarms.. Just an idea of course..
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: eepSKYe
Mike, eepskye.
logical switches:
L2 v=val Gvr1 3 Delay 1,3
It doesn't seem to delay. the switch seems to turn ON as soon as the condition is met
it is possible that you fixed this and I have an older version of eepskye? It says r422 from 18th Feb
Thanks
João
logical switches:
L2 v=val Gvr1 3 Delay 1,3
It doesn't seem to delay. the switch seems to turn ON as soon as the condition is met
it is possible that you fixed this and I have an older version of eepskye? It says r422 from 18th Feb
Thanks
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- MikeB
- 9x Developer
- Posts: 17996
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: eepSKYe
I included an eepskye in the r222 a8 test vesion, try that one as it seems to delay OK for me.
Mike
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: eepSKYe
Yes, it works on the latest one.. Obviously i did forget to update.. Thanks
Been busy with some other projects But managed to go to the field today.. nice weather
João
Been busy with some other projects But managed to go to the field today.. nice weather
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: eepSKYe
Mike, in eepskye try setting a logical switch with a timer set to 0.5 and 0.5 it switches too fast, and longer on the OFF state
I used L2
João
I used L2
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: eepSKYe
Please try this in eepskye.. it is not working as it should.. it does work for a while a after a few times not working
L1 1-shot GEA 5.6
L2 Timer 1.0 1.0 AND L4
L3 1-shot !GEA 1.5
L4 OR L1 L3
Thanks
João
L1 1-shot GEA 5.6
L2 Timer 1.0 1.0 AND L4
L3 1-shot !GEA 1.5
L4 OR L1 L3
Thanks
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- MikeB
- 9x Developer
- Posts: 17996
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: eepSKYe
There seems to be a random problem with a logical switch set to timer with an AND switch. Sometimes, either the ON time or the OFF time gets cut short.I don't think this will be quick to find as the code is the same as that on the radio, but is driven by a Windows timer not a hardware timer. I can't use DEBUG mode as this is running in real time!
Mike
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: eepSKYe
But this certainly worked correctly before.
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: eepSKYe (Editing Model Window being squished up )
Hi Mike,
Problem after Upgrading my Win-7 decktop with eepSkye Rev. Feb 18 2018 (http://www.er9x.com/).
Having trouble with the Editing Model Window being squished up
and not able to read.
When I grab on it to pull it bigger, it will not move.
It is staying squished up.
I then downloaded TEST eepSkye Rev. p423 March 18 2018 (https://openrcforums.com/forum/viewtopi ... =91&t=2835)
and used it to replace eepSkye Rev. Feb 18 2018 with same results.
-------------------------------------------------------------------------------------------------------------------
I do have a new Lenovo laptop Win-10 and installed eepSkye Rev. Feb 18 2018
and it is working properly.
Also on my Win-7 decktop with eepe Rev. 422, Feb 18 2018 is working properly too.
--------------------------------------------------------------------------------------------------------------------
Is there something I am doing incorrectly with (eepSkye) my Win 7 op ?
Problem after Upgrading my Win-7 decktop with eepSkye Rev. Feb 18 2018 (http://www.er9x.com/).
Having trouble with the Editing Model Window being squished up
and not able to read.
When I grab on it to pull it bigger, it will not move.
It is staying squished up.
I then downloaded TEST eepSkye Rev. p423 March 18 2018 (https://openrcforums.com/forum/viewtopi ... =91&t=2835)
and used it to replace eepSkye Rev. Feb 18 2018 with same results.
-------------------------------------------------------------------------------------------------------------------
I do have a new Lenovo laptop Win-10 and installed eepSkye Rev. Feb 18 2018
and it is working properly.
Also on my Win-7 decktop with eepe Rev. 422, Feb 18 2018 is working properly too.
--------------------------------------------------------------------------------------------------------------------
Is there something I am doing incorrectly with (eepSkye) my Win 7 op ?
Last edited by bob195558 on Tue Jan 01, 2019 1:24 am, edited 2 times in total.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: eepSKYe
There is trouble with this version too.
But is a little better, as I can make it longer, but not larger up and down.
And some of the windows are not the correct size in some of the tab windows too.
And I think some stuff may be missing too (2014 version).
(https://openrcforums.com/forum/viewtopi ... =91&t=2835)
But is a little better, as I can make it longer, but not larger up and down.
And some of the windows are not the correct size in some of the tab windows too.
And I think some stuff may be missing too (2014 version).
(https://openrcforums.com/forum/viewtopi ... =91&t=2835)
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: eepSKYe
The older eepSkye Version 421, Nov. 21, 2016 is better, but has some things squished together also too.
For now, I can use this version with my Win-7 (64 bit) desktop computer.
The newer versions do not work with my Win-7 (64 bit) desktop computer.
.
For now, I can use this version with my Win-7 (64 bit) desktop computer.
The newer versions do not work with my Win-7 (64 bit) desktop computer.
.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: eepSKYe
Programing with eepSkye (Win 10) with the 9XTreme/erSky9x,
I do not see where/how to set the A2-PackVoltage Alarms (Yellow and Red) in the tab Telemetry ?
Help !
I do not see where/how to set the A2-PackVoltage Alarms (Yellow and Red) in the tab Telemetry ?
Help !
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
- MikeB
- 9x Developer
- Posts: 17996
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: eepSKYe
They got removed in R221. Initially they were used to set alarms in a DJT/DHT module. Later, the firmware handled them. When I added Voice Alerts, which allow beeps as well, these very specific alarms became unnecessary. I left them in for quite some time, but decided to remove them in R221.
I'm not sure about your window resolution problem, I've not seen that before. May just be a Windows setting. I came across a setting that caused the FrSky SxR configuration application to display incorrectly at some point.
Mike
I'm not sure about your window resolution problem, I've not seen that before. May just be a Windows setting. I came across a setting that caused the FrSky SxR configuration application to display incorrectly at some point.
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: RE: Re: eepSKYe
Oh yes you didMikeB wrote:
I'm not sure about your window resolution problem, I've not seen that before.
Mike
Remember a few years ago I said that eepskye didn't fit and it didn't adjust to my notebook's display?
Well, that notebook is on linux (Lubuntu) only now. I can try to install eepskye and see what happens.
João
Sent from my BLN-L21 using Tapatalk
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: eepSKYe (Editing Model Window being squished up)
The newer test Rev. p423 March 18 2018 and Rev. Feb 18 2018 have a bigger problem
then the older eepSkye Rev. 421, Nov. 21, 2016 does with Win 7.
Win-7 64 bit, Monitor Screen Resolution: 3840 x 2160
-------------------------------------------------------------------------------------------------------------------
Win 10 is working properly.
then the older eepSkye Rev. 421, Nov. 21, 2016 does with Win 7.
Win-7 64 bit, Monitor Screen Resolution: 3840 x 2160
-------------------------------------------------------------------------------------------------------------------
Win 10 is working properly.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
-
- Posts: 313
- Joined: Thu Dec 29, 2011 10:18 am
- Country: Australia
- Location: Cooloola Cove, Australia
Re: eepSKYe
Mike, I cannot edit a switch used in a mix. The dropdown list box is not populated. This is version P423 dated 26/01/2019.
- MikeB
- 9x Developer
- Posts: 17996
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: eepSKYe
Which radio? The switches dropdown is populated differently for different radios.
Mine is OK on SKY, 9Xtreme and QX7 I just tested (although I built mine a few days later). I'll check the version you have later today.
Mike
Mine is OK on SKY, 9Xtreme and QX7 I just tested (although I built mine a few days later). I'll check the version you have later today.
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
- MikeB
- 9x Developer
- Posts: 17996
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: eepSKYe
That version did have a problem with some radio types. I've just posted an updated version (for windows) that doesn't have the problem.
It seems the editing window may appear "squashed" at times due to the (default) screen font. I'm looking into that.
Mike
It seems the editing window may appear "squashed" at times due to the (default) screen font. I'm looking into that.
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: eepSKYe
So the problem may not be the monitor screen
resolution, but the (default) screen font.
Thank you Mike for looking into this !
resolution, but the (default) screen font.
Thank you Mike for looking into this !
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
-
- Posts: 313
- Joined: Thu Dec 29, 2011 10:18 am
- Country: Australia
- Location: Cooloola Cove, Australia
Re: eepSKYe
That fixed the problem, thanks once again for the quick response. In future I will remember to give you the additional detail about the radio.
Dave
- MikeB
- 9x Developer
- Posts: 17996
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: eepSKYe
I've posted a test version where I'm allowing the window to be sized larger and that also puts in scroll bars if things don't fit. Please try this (but keep your existing version in case you need to revert) and see if it avoids the "squashed" display.
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: eepSKYe
Cool, must try this on my notebook. Never seen the bottom part of eepskye on that computer. It runs Linux though
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: eepSKYe
Hi Mike,
I am having trouble finding the eepSkye test version Feb 22, 2019 (for windows).
I believe it should (may) be posted on the first posting of this string (eepSkye), is this correct ?
(viewtopic.php?f=91&t=2835)
I am having trouble finding the eepSkye test version Feb 22, 2019 (for windows).
I believe it should (may) be posted on the first posting of this string (eepSkye), is this correct ?
(viewtopic.php?f=91&t=2835)
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
Re: eepSKYe
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: eepSKYe
Found it here:
(viewtopic.php?f=7&t=4676) "Ersky9x Test Versions" .
Suggestion: May need a note on the first posting (this string), directing where find "eepSkye test versions"
Thank you Mike, I will try this new test version soon.
(viewtopic.php?f=7&t=4676) "Ersky9x Test Versions" .
Suggestion: May need a note on the first posting (this string), directing where find "eepSkye test versions"
Thank you Mike, I will try this new test version soon.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).