Mike,
Have now further tested the 'uSec' and '0.1%' change to set-up the XVERT VTOL -- it works EXACTLY as required - the motor-kill, which requires a very exact uSec setting, now works as required and the same as using the plane with it's original Spektrum Tx, except that I am using 9XRPro, ErSky9x and an Orange external DSM module. I have been struggling to get this one (specific) feature working properly for several weeks - now, in one programming change, it is solved.
Thanks, again.
ozphoenix
P.S. You do understand, of course, that I'm tempted to ask for this '0.1%' increment 'feature' on the channel mix screens and anywhere else that you might think relevant???
But, I will not ask for it yet unless others chime in and suggest that it's useful to them, as well - for me, it solved a specific problem on a specific menu page for a specific plane -- for others, it might not be so interesting.
ozphoenix wrote: ↑Wed Apr 25, 2018 10:49 am
.......in trying to implement a setup recommended by another (Open-TX) user of the XVERT, an offered scenario for implementing motor-kill requires an over-ride of (exactly, not more than nor less than) 980uSec or it will not work properly (it is claimed and seems correct, by my own experiences). Because I can only use 1% increments in the Safety Switch set-up, I go from 977uSec to 987uSec -- I cannot get 980uSec exactly.
Whether or not it is necessary to be so exact is not my question....