Is there a way I can get my 9XR pro to read out my mAh consumed? or at least warn me when its at a certain amount? I know you can do it on the taranis but cant figure out how to do it on my 9xr pro.
Thanks
Frsky Xjt
Frsky X4R-sb
ersky9x-pr219
V.841
9XR Pro mAh telemetry
- MikeB
- 9x Developer
- Posts: 18000
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: 9XR Pro mAh telemetry
On the Telemetry menu, select your current sensor as the "Currnet Source" (last item on the menu). The telemetry item "Mah" will then show the current consumed. If you also set a value for mAh Alarm, then the FUEL value will show how much you have left, and also sound a warning when you get to "empty".
If you press EXIT when on a telemetry menu, you reset the telemetry that includes setting the consumed mAh to 0.
Mike.
If you press EXIT when on a telemetry menu, you reset the telemetry that includes setting the consumed mAh to 0.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: 9XR Pro mAh telemetry
I will try that. Thanks
Re: 9XR Pro mAh telemetry
Hey Mike, sorry writing so late. haven't been able to fly. I did what you said and I didn't get any readings.
- MikeB
- 9x Developer
- Posts: 18000
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: 9XR Pro mAh telemetry
What current sensor are you using?
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: 9XR Pro mAh telemetry
Im using the frsky x4r-sb w/telemetry , Kiss fc.
Re: 9XR Pro mAh telemetry
Unless you have a current sensor in your system you can't have that info. Sounds like you don't.
Re: 9XR Pro mAh telemetry
ok thanks
Re: 9XR Pro mAh telemetry
How does my buddy's taranis have current sensing and he has the same set up (on quad)? We just have different controllers. I am running the XJT module.
Re: 9XR Pro mAh telemetry
Can't tell without knowing about all components in both setups... once thing that is sure is that to have mAh reading you need a current sensor onboard. Whether it's added separately, part of a PDB, who knows what there are many possibilities, but we can't guess.