Switch setup
-
- Posts: 10
- Joined: Sun Feb 21, 2016 12:15 am
- Country: -
Switch setup
I have a Taranis X9D PLUS IM trying to install a remote switch for my light I can get it to work on S2 but not on a fisical switch say SC any help
- deaconFlyer
- Posts: 76
- Joined: Fri Apr 05, 2013 11:22 am
- Country: Canada
- Location: Ontario
Re: Switch setup
There are simply a ton of variables and possible answers here.
I trust you are using CompanionTX ... which will make this really easy. Find out using the simulator what S2 is doing that works and make the other switch do exactly the same thing.
The other issue can be at the receiver end ... can't tell you the number of times things are plugged into the wrong port / channel. Again, the simulator will show so many issues right at the get go.
You can also do everything on the LCD ... just a little slower and a lot less visual.
Good luck!
I trust you are using CompanionTX ... which will make this really easy. Find out using the simulator what S2 is doing that works and make the other switch do exactly the same thing.
The other issue can be at the receiver end ... can't tell you the number of times things are plugged into the wrong port / channel. Again, the simulator will show so many issues right at the get go.
You can also do everything on the LCD ... just a little slower and a lot less visual.
Good luck!
-
- Posts: 10
- Joined: Sun Feb 21, 2016 12:15 am
- Country: -
Re: Switch setup
Will try that but yes right channel. , triple chked that