Hi,
Before the 9Xtreme Upgrade Board for the 9x radios arrives,
I will do the Reverse Current Protection Mod on the 9x Main Switch Board. Cut Track and add SS34 Vishay DIODE SCHOTTKY 40V 3A SMC (http://www.ebay.com/itm/20PCS-SS34-Vish ... 2a5236986c)
(viewtopic.php?f=95&t=7182&start=270#p101974)MikeB wrote:The 9Xtreme has a processor controlled power switch for the Tx modules, so on the 9Xtreme, they will be protected by the single diode.
If doing this mod, I would suggest removing the 5V regulator on the switch board at the same time, it isn't needed anymore.
Mike.
Mike, What do you suggest, that I should do to (disconnect CJ78L05) removing the 5V regulator on the Switch Board ? If you have SHUTTING DOWN screen message see: (viewtopic.php?f=126&t=7828&p=103935#p103847).
See here for other 9Xtreme information: (viewtopic.php?f=95&t=7182).
Bob B.