LED lights on a quad
LED lights on a quad
Hi there.New to the forum And could not find a template for my quad.
I want to be able to do the following: My quad will have strip led's on it.i want to use ch 6 on the receiver to drive a brushed esc. The 2 position switch will be used in the following manner. ID0 lights off. ID1 the lights will come on and in conjunction with the Pot next to the trainer switch adjust the brightness of the lights. ID2 and the lights need to flash using I think the range check function.
Will this work? Secondly how would I program the radio?
Thank you
I want to be able to do the following: My quad will have strip led's on it.i want to use ch 6 on the receiver to drive a brushed esc. The 2 position switch will be used in the following manner. ID0 lights off. ID1 the lights will come on and in conjunction with the Pot next to the trainer switch adjust the brightness of the lights. ID2 and the lights need to flash using I think the range check function.
Will this work? Secondly how would I program the radio?
Thank you
Re: LED lights on a quad
Hi welcome to the forums.. What FW are you using and which radio?
Here is an example for er9x. open the file in eepe
Here is an example for er9x. open the file in eepe
- Attachments
-
- Lights.eepe
- (1.48 KiB) Downloaded 541 times
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: LED lights on a quad
Hi there. Using the 9X with er9x softwarejhsa wrote:Hi welcome to the forums.. What FW are you using and which radio?
Here is an example for er9x. open the file in eepe
Re: LED lights on a quad
ok, are you using eepe? then you can open the file I posted above..
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: LED lights on a quad
Yes I am. Thank you this,looks like just what I need.jhsa wrote:ok, are you using eepe? then you can open the file I posted above..
João
Re: LED lights on a quad
Great,, try playing with the values of the timer in costum switches and with the slow values in the mixer. You might be able to get some really cool results.
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: LED lights on a quad
hmm, interesting. what does the CS: Timer V1=2 V2=2 stand for? Never paid attention to the 'Timer' function.
Re: LED lights on a quad
it's a timer. V1 and V2 are the on/off times.. then you can use the CS to blink whatever you want
Or a servo tester if used together with slow, just like in the eepe file above. he wants to control a ESC, but it could also work as a servo tester
João
Or a servo tester if used together with slow, just like in the eepe file above. he wants to control a ESC, but it could also work as a servo tester
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: LED lights on a quad
V1 is on, V2 is off?
yep, I used a servo tester to do blinking.
Here is a teaser for you. same criteria for ID0-2, but add P1 for adjustable rate of flashing, P2 for adjustable intensity on ID2. I have not figure this out yet.
yep, I used a servo tester to do blinking.
Here is a teaser for you. same criteria for ID0-2, but add P1 for adjustable rate of flashing, P2 for adjustable intensity on ID2. I have not figure this out yet.
Re: LED lights on a quad
Maybe using GVARS, but I can't see how at the moment
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- MikeB
- 9x Developer
- Posts: 18000
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: LED lights on a quad
Have a look at:
http://openrcforums.com/forum/viewtopic ... 242#p60269
for a way to get a variable timer.
Mike.
http://openrcforums.com/forum/viewtopic ... 242#p60269
for a way to get a variable timer.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: LED lights on a quad
Mike, if I remember you left some spaces on the timer values for GVARS, didn't you?
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: LED lights on a quad
Ok so something is a bit screwy. I think my er9x software on my radio is old. When setting ID0 I don't have a HALF option. There is full and max. The dim bright on ID1 works fine using P2. By the custom switches I have only 3 things I can change. At the function option I don't have a option to select Timer.
So in short I think I need to update my software on the radio?
So in short I think I need to update my software on the radio?
- MikeB
- 9x Developer
- Posts: 18000
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: LED lights on a quad
MAX got changed to HALF on 28-Feb 2012, so you are missing a lot of changes/updates.
Here is a copy of the changelog: So you can see all the changes that have happened since.
Mike.
Here is a copy of the changelog: So you can see all the changes that have happened since.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: LED lights on a quad
Which is considered the best of the latest software updates? And then where do i find it?
- MikeB
- 9x Developer
- Posts: 18000
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: LED lights on a quad
I believe the latest revision is fine, I flew with it OK yesterday.
Use eepe, and do a check for updates. This should get the the latest. Update eepe at the same time as the most recent changes need the updated eepe.
Mike.
Use eepe, and do a check for updates. This should get the the latest. Update eepe at the same time as the most recent changes need the updated eepe.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: LED lights on a quad
Ok radio eventually successfully flashed and programming done. The LED lights are working. Thank you very much for the template.