Hi friends. A friend of mine has the exit button damaged. It needs to be replaced. Could you tell me the size? I guess it is a SMD switch, 4.5mm? How long?
Thanks!
9x Exit button size.
9x Exit button size.
https://radindustries.wordpress.com/
Re: 9x Exit button size.
Just to point the button was damaged in shipping. It does not make the characteristic "click" when pressed anymore, and he has to press it very hard to make it work, so it looks like it needs to be replaced.
Unfortunately I dont have more 9x radios so far except my extreme so I cannot measure or check any special button propperties.
Unfortunately I dont have more 9x radios so far except my extreme so I cannot measure or check any special button propperties.
https://radindustries.wordpress.com/
Re: 9x Exit button size.
9x radio normally uses 6x6x9.5 mm tactile switches
e.g.
https://www.ebay.de/itm/6x6mm-Momentary ... Swq2pbO1Wm
Reinhard
e.g.
https://www.ebay.de/itm/6x6mm-Momentary ... Swq2pbO1Wm
Reinhard
- stotty1111
- Posts: 238
- Joined: Mon Aug 11, 2014 5:56 pm
- Country: France
- Location: overlooking Douarnenez Bay Finistere
Re: 9x Exit button size.
yeap they are the ones, I also used my last one recently!!- I have an old board somewhere there might be one or two on it, i'll try to locate it over the weekend!
- MikeB
- 9x Developer
- Posts: 18000
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: 9x Exit button size.
That problem can happen when the plastic "button" is not aligned correctly with the actual switch. Sometimes simply opening the case and making sure the plastic buttons are in the correct place will solve the problem. On a number of occasions I've had re-open a 9X because the plastic buttons didn't quite align correctly.
Mike
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: 9x Exit button size.
Thanks for the help, guys, very appreciated.
In this case the SMD button is broken. He opened the radio and checked inside and it does not do any click... So it needs replacing.
In this case the SMD button is broken. He opened the radio and checked inside and it does not do any click... So it needs replacing.
https://radindustries.wordpress.com/
Re: 9x Exit button size.
It is not an SMD switch It is through hole.
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW