Pictures / Photos not showing when posted
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Pictures / Photos not showing when posted
Note: I do not know why this picture will not show,
Something is wrong with the web sight because there use to be no troubles to show pictures.
It says it is not downloaded, but it is and will not show.
https://openrcforums.com/forum/viewtopi ... 17#p154817
==============================================================================
The fix is !!!
Something has been change on how openrcforums allows
Pictures/Photos to be seen in each posting.
So, to be able to post a Pictures / Photos to be seen in your posting,
you need to change which ever of the sides (Horizontal or Vertical)
so that the largest amount of the Pixels will be about 750 (maximum) pixels or less.
If 750 pixels dose not work, then keep lowering the amount until it does.
I have been using Windows Paint to modify the pictures down to these newer
allowed Pixel amounts. ==============================================================================
Something is wrong with the web sight because there use to be no troubles to show pictures.
It says it is not downloaded, but it is and will not show.
https://openrcforums.com/forum/viewtopi ... 17#p154817
==============================================================================
The fix is !!!
Something has been change on how openrcforums allows
Pictures/Photos to be seen in each posting.
So, to be able to post a Pictures / Photos to be seen in your posting,
you need to change which ever of the sides (Horizontal or Vertical)
so that the largest amount of the Pixels will be about 750 (maximum) pixels or less.
If 750 pixels dose not work, then keep lowering the amount until it does.
I have been using Windows Paint to modify the pictures down to these newer
allowed Pixel amounts. ==============================================================================
Last edited by bob195558 on Tue Dec 28, 2021 1:58 pm, edited 3 times in total.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
Re: pictures will not show
I can see the picture. It is a multimeter and a power supply
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: pictures will not show
Hi João,
Yes, but it use to post the picture itself and not the link to it.
How come and how do I fix it ?
Yes, but it use to post the picture itself and not the link to it.
How come and how do I fix it ?
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: pictures will not show
It is downloaded, but says (Not downloaded yet)
If it is not downloaded then it can not be posted, so it is downloaded.
If it is not downloaded then it can not be posted, so it is downloaded.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
Re: pictures will not show
Not downloaded means nobody has clicked the link to download the file you posted yet...
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: pictures will not show
Hi Kilrah,
Yes that’s right, I remember now that part.
Still, why is a picture link posted only and not the picture itself ?
Yes that’s right, I remember now that part.
Still, why is a picture link posted only and not the picture itself ?
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
Re: pictures will not show
How did you post that picture? Browser? Tapatalk? Other?
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: pictures will not show
They show inline on tapatalk but not on web.
Seems some pictures work and others not... no idea why.
Seems some pictures work and others not... no idea why.
Re: pictures will not show
Perhaps it something to do with posting them with Tapatalk?
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: pictures will not show
I do not use Tapatalk myself.
Most Pictures I have posted are from my Kodak Z980 camera in JPG format.
Some are edited with Photoshop Element 8 which also maybe used to lower the file size.
Some other pictures are maybe screen shots and edited with Windows Paint also in JPG.
I have tried to find some common stuff that may show what works and what is not working and nothing still seem to not work at all.
Picture File Size, Picture Shape, Picture File Format, none of these cause any known reason to why it is not working.
It seems, something was change with how the forum works, which may has caused the trouble.
If the trouble is with something being changed, I do not know what it could be.
I do know in the past I was able to post any pictures with no troubles.
Most Pictures I have posted are from my Kodak Z980 camera in JPG format.
Some are edited with Photoshop Element 8 which also maybe used to lower the file size.
Some other pictures are maybe screen shots and edited with Windows Paint also in JPG.
I have tried to find some common stuff that may show what works and what is not working and nothing still seem to not work at all.
Picture File Size, Picture Shape, Picture File Format, none of these cause any known reason to why it is not working.
It seems, something was change with how the forum works, which may has caused the trouble.
If the trouble is with something being changed, I do not know what it could be.
I do know in the past I was able to post any pictures with no troubles.
Last edited by bob195558 on Mon Oct 18, 2021 11:00 pm, edited 1 time in total.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
Re: pictures will not show
I will try to post some test pictures.
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: pictures will not show
This posting pictures trouble began some time before Jan 06, 2021.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
- MikeB
- 9x Developer
- Posts: 18000
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: pictures will not show
At some point I noticed I needed to make pictures smaller (lower resolution) to make them appear in line.
I've downloaded your picture from the third post and resized it to 15%. It is now only 28K instead of 717K and displays. At 25% (135K) it doesn't display. At 20% (94K) it will display.
I would suggest that, unless you expect a picture to be downloaded, rather than just viewed on screen, an image size of around 500 by 500 pixels is quite large enough for most people. You original image is 3000 pixels high, my monitor is only 1080 high, so I only need an image 1000 high, at most, for viewing!
Mike
I've downloaded your picture from the third post and resized it to 15%. It is now only 28K instead of 717K and displays. At 25% (135K) it doesn't display. At 20% (94K) it will display.
I would suggest that, unless you expect a picture to be downloaded, rather than just viewed on screen, an image size of around 500 by 500 pixels is quite large enough for most people. You original image is 3000 pixels high, my monitor is only 1080 high, so I only need an image 1000 high, at most, for viewing!
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: pictures will not show
I had some pics at 101Kb that didn't display, so I guess there's a 100K limit.
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: pictures will not show
Thank you MikeB and Kilrah,
I did not try reducing the picture size down below 100K.
Though this picture MEAN WELL Power Supply 5V 18A.jpg (112.62 KiB)
(which was a screen-shot into Windows-Paint and saved as JPEG)
did display the first time and when testing it later, it would not display,
but it does today.
When testing for picture display size I find if it shows in the Preview
then it will also show when Submit is used.
I will do some more testing today of changing picture sizes.
I did not try reducing the picture size down below 100K.
Though this picture MEAN WELL Power Supply 5V 18A.jpg (112.62 KiB)
(which was a screen-shot into Windows-Paint and saved as JPEG)
did display the first time and when testing it later, it would not display,
but it does today.
When testing for picture display size I find if it shows in the Preview
then it will also show when Submit is used.
I will do some more testing today of changing picture sizes.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: pictures will not show
I believe I can confirm what MikeB has found.
Not the size of picture file, but the Pixel sizes of the picture.
With a rectangle shaped picture the Horizontal Pixels and the Vertical Pixels,
which are different values, makes a difference when you rotate the picture.
So that orientation of the picture will cause the picture to be displayed or not.
Horizontal 739 x Vertical 502 Pixels will display the picture,
but rotate this picture 90 degree so that the Horizontal is 502 and the Vertical is 739 pixels
and it will not display picture.
Also it does not seem to be a total of the picture’s pixels,
but that there may be a maximum for the Horizontal pixels
and a separate maximum pixel value for the Vertical pixels.
Not the size of picture file, but the Pixel sizes of the picture.
With a rectangle shaped picture the Horizontal Pixels and the Vertical Pixels,
which are different values, makes a difference when you rotate the picture.
So that orientation of the picture will cause the picture to be displayed or not.
Horizontal 739 x Vertical 502 Pixels will display the picture,
but rotate this picture 90 degree so that the Horizontal is 502 and the Vertical is 739 pixels
and it will not display picture.
Also it does not seem to be a total of the picture’s pixels,
but that there may be a maximum for the Horizontal pixels
and a separate maximum pixel value for the Vertical pixels.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).