Hi there,
I got a 2nd hand 9x and the 9xtreme. There is one part (maybe a voltage regulator?) removed and replace with a hack, see the screenshot. I read that the 9x comes with its own voltage regulator. Now I think that it might be better to remove the part, that is stuck with wires and hotglue and then install the 9xtreme that is powering the 9x cpu. Does that make sense or should I leave the part where it is? Sorry cant read any markings on the part.
The programmer interface is obviously the first thing to remove.
Thx for you help
Marcus
Installing on an old TX with some mods
-
- Posts: 2
- Joined: Tue Oct 11, 2016 4:52 pm
- Country: -
- MikeB
- 9x Developer
- Posts: 18000
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Installing on an old TX with some mods
I think that is the 3.3V regulator for the display, so will need to stay.
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
-
- Posts: 2
- Joined: Tue Oct 11, 2016 4:52 pm
- Country: -
Re: Installing on an old TX with some mods
Thx Mike for responding so fast. I move the hacked part so that is not below the 9xtreme and everything works fine now.
Gesendet von meinem Nexus 4 mit Tapatalk
Gesendet von meinem Nexus 4 mit Tapatalk