The leds on ths DJT and receiver were EXACTLY as you drscribed.
It
Στάλθηκε από το Redmi Note 3 μου χρησιμοποιώντας Tapatalk
Can't Bind
- MikeB
- 9x Developer
- Posts: 17996
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Can't Bind
Do you have any servos to plug into the receiver normally?
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Can't Bind
I have the cables from the tarot fc to the receiver but the camera is pluged directly to rx
Στάλθηκε από το Redmi Note 3 μου χρησιμοποιώντας Tapatalk
Στάλθηκε από το Redmi Note 3 μου χρησιμοποιώντας Tapatalk
Re: Can't Bind
I unscrewed the smartieparts board and i saw something wrong. A cable from the board was cut. I solder it but still nothing. The board doesn't seem to have a problem. And now I'm not sure if i took out the DJT with the tx switched on at the first place. Something else is wrong.
Στάλθηκε από το Redmi Note 3 μου χρησιμοποιώντας Tapatalk
Στάλθηκε από το Redmi Note 3 μου χρησιμοποιώντας Tapatalk
Re: Can't Bind
Στάλθηκε από το Redmi Note 3 μου χρησιμοποιώντας Tapatalk
Re: Can't Bind
The cut cable seemed like it got hot and cut from the board.
Στάλθηκε από το Redmi Note 3 μου χρησιμοποιώντας Tapatalk
Στάλθηκε από το Redmi Note 3 μου χρησιμοποιώντας Tapatalk