Page 3 of 3
Re: Can't Bind
Posted: Mon Aug 08, 2016 8:04 pm
by Kdaffy
The leds on ths DJT and receiver were EXACTLY as you drscribed.
It
Στάλθηκε από το Redmi Note 3 μου χρησιμοποιώντας Tapatalk
Re: Can't Bind
Posted: Mon Aug 08, 2016 9:16 pm
by MikeB
Do you have any servos to plug into the receiver normally?
Mike.
Re: Can't Bind
Posted: Tue Aug 09, 2016 5:42 am
by Kdaffy
I have the cables from the tarot fc to the receiver but the camera is pluged directly to rx
Στάλθηκε από το Redmi Note 3 μου χρησιμοποιώντας Tapatalk
Re: Can't Bind
Posted: Tue Aug 09, 2016 4:55 pm
by Kdaffy
I unscrewed the smartieparts board and i saw something wrong. A cable from the board was cut. I solder it but still nothing. The board doesn't seem to have a problem. And now I'm not sure if i took out the DJT with the tx switched on at the first place. Something else is wrong.
Στάλθηκε από το Redmi Note 3 μου χρησιμοποιώντας Tapatalk
Re: Can't Bind
Posted: Tue Aug 09, 2016 4:55 pm
by Kdaffy
Στάλθηκε από το Redmi Note 3 μου χρησιμοποιώντας Tapatalk
Re: Can't Bind
Posted: Tue Aug 09, 2016 4:57 pm
by Kdaffy
The cut cable seemed like it got hot and cut from the board.
Στάλθηκε από το Redmi Note 3 μου χρησιμοποιώντας Tapatalk