My quadcopter has had an issue where it occasionally just drops for a quarter of a second. Do you guys have any idea how I could get rid of this issue.
Controller randomly giving a zero throttle signal
-
- Posts: 7
- Joined: Mon Dec 28, 2015 4:15 pm
- Country: -
- MikeB
- 9x Developer
- Posts: 17995
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Controller randomly giving a zero throttle signal
On the radio, on the main "bars" screen, do you see the bar for the throttle channel drop?
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
-
- Posts: 7
- Joined: Mon Dec 28, 2015 4:15 pm
- Country: -
Re: Controller randomly giving a zero throttle signal
I do not believe that it has. Although I could possibly be mistaken. Tomorrow I will try to put the throttle on a different channel that what it is currently on. ie. moving throttle to channel 6 instead of 4.MikeB wrote:On the radio, on the main "bars" screen, do you see the bar for the throttle channel drop?
Mike.
BTW i'm using s-bus on the x4r.
-
- Posts: 7
- Joined: Mon Dec 28, 2015 4:15 pm
- Country: -
Re: Controller randomly giving a zero throttle signal
I changed the channel that my throttle was on and to no avail it stilled continued to give me a zero throttle signal randomly.
Re: Controller randomly giving a zero throttle signal
Maybe this is failsafe kicking in? Check if your channel ranges conflict with the failsafe configuration.