Wrong assignment of GVs in mixes
Posted: Fri May 20, 2016 3:39 pm
Hi,
just bumped into this bug in Companion 2.1.8:
1. Create a mix with a GV as weight (not sure if this is relevant for reproducing the bug), say GV3, and another GV as a "diff" curve, say GV5.
2. Save the model.
3. Reopen the mix, and change "diff" by "expo". GV setting is reset. Tick the box again. GV5 appears as the chosen value. Say "OK".
4. Read the Mix screen: The expo is now controlled by GV1.
5. Reopen the mix and re-choose GV5. Now it is set correctly.
When ticking the "GV" box again, and GV5 appears, opening the drop down box and reselecting GV5 again does not help, GV1 will then appear when you click OK.
Hope this helps...
Cheers,
just bumped into this bug in Companion 2.1.8:
1. Create a mix with a GV as weight (not sure if this is relevant for reproducing the bug), say GV3, and another GV as a "diff" curve, say GV5.
2. Save the model.
3. Reopen the mix, and change "diff" by "expo". GV setting is reset. Tick the box again. GV5 appears as the chosen value. Say "OK".
4. Read the Mix screen: The expo is now controlled by GV1.
5. Reopen the mix and re-choose GV5. Now it is set correctly.
When ticking the "GV" box again, and GV5 appears, opening the drop down box and reselecting GV5 again does not help, GV1 will then appear when you click OK.
Hope this helps...
Cheers,