avrdude: Version 6.2-20151117, compiled on Nov 26 2015 at 14:30:47
Copyright (c) 2000-2005 Brian Dean,
http://www.bdmicro.com/
Copyright (c) 2007-2014 Joerg Wunsch
System wide configuration file is "/usr/local/Cellar/avrdude/HEAD/etc/avrdude.conf"
User configuration file is "/Users/evils/.avrduderc"
User configuration file does not exist or is not a regular file, skipping
Using Port : usb
Using Programmer : usbasp
Overriding Baud Rate : 19200
avrdude: seen device from vendor ->
www.fischl.de<-
avrdude: seen product ->USBasp<-
AVR Part : ATmega64
Chip Erase delay : 9000 us
PAGEL : PD7
BS2 : PA0
RESET disposition : dedicated
RETRY pulse : SCK
serial program mode : yes
parallel program mode : yes
Timeout : 200
StabDelay : 100
CmdexeDelay : 25
SyncLoops : 32
ByteDelay : 0
PollIndex : 3
PollValue : 0x53
Memory Detail :
Block Poll Page Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
eeprom 4 20 64 0 no 2048 8 0 9000 9000 0xff 0xff
flash 33 6 128 0 yes 65536 256 256 4500 4500 0xff 0xff
lfuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
hfuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
efuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
lock 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
calibration 0 0 0 0 no 4 0 0 0 0 0x00 0x00
signature 0 0 0 0 no 3 0 0 0 0 0x00 0x00
Programmer Type : usbasp
Description : USBasp,
http://www.fischl.de/usbasp/
avrdude: auto set sck period (because given equals null)
avrdude: AVR device initialized and ready to accept instructions
Reading | ################################################## | 100% 0.00s
avrdude: Device signature = 0x1e9602 (probably m64)
avrdude: safemode: hfuse reads as 89
avrdude: safemode: efuse reads as FF
avrdude: NOTE: "flash" memory has been specified, an erase cycle will be performed
To disable this feature, specify the -D option.
avrdude: erasing chip
avrdude: auto set sck period (because given equals null)
avrdude: reading input file "er9x.hex"
avrdude: input file er9x.hex auto detected as Intel Hex
avrdude: writing flash (61358 bytes):
Writing | ################################################## | 100% 24.80s
avrdude: 61358 bytes of flash written
avrdude: verifying flash memory against er9x.hex:
avrdude: load data flash data from input file er9x.hex:
avrdude: input file er9x.hex auto detected as Intel Hex
avrdude: input file er9x.hex contains 61358 bytes
avrdude: reading on-chip flash data:
Reading | ################################################## | 100% 15.91s
avrdude: verifying ...
avrdude: 61358 bytes of flash verified
avrdude: safemode: hfuse reads as 89
avrdude: safemode: efuse reads as FF
avrdude: safemode: Fuses OK (E:FF, H:89, L:0E)
avrdude done. Thank you.