ok i want to use my trn swith to turn on P3 For my gimbal for Roll and when i press it again to use P3 to control Yaw and press again to turn off
it starts with off
klik it one time activate p3 to control roll
klik 2 times to activate p3 to control Yaw
klik 3 times to turn off,
or something like that, is that possible
edit. i am using a turnigy 9x with mikes Firmware v817
Using Trn Swith to turn P3 on
Re: Using Trn Swith to turn P3 on
Try this on this post from Mike:
viewtopic.php?f=5&t=2&start=2160#p93297
It will give you 4 combinations. A different one every time you flick the trainer switch. You need 3 only so you will have to click once more to return to the beginning.
You will need to detect the first 3 positions.. Both switches OFF, and either of them ON.
So, from the link:
L1 F-Flop TRN !L1
L2 F-Flop !L1 !L2
The above will give you 4 different possibilities.
Now to detect them with some more logical switches.
L3 AND !L1 !L2 - Use L3 in the mixer for OFF
L4 AND L1 !L2 - Use L4 in the mixer to activate P3 to roll
L5 AND L2 !L1 - Use L5 in the mixer to activate P3 to yaw
L6 AND L1 L2 - Use L6 in the mixer to control whatever else you want, or just don't use it..
João
viewtopic.php?f=5&t=2&start=2160#p93297
It will give you 4 combinations. A different one every time you flick the trainer switch. You need 3 only so you will have to click once more to return to the beginning.
You will need to detect the first 3 positions.. Both switches OFF, and either of them ON.
So, from the link:
L1 F-Flop TRN !L1
L2 F-Flop !L1 !L2
The above will give you 4 different possibilities.
Now to detect them with some more logical switches.
L3 AND !L1 !L2 - Use L3 in the mixer for OFF
L4 AND L1 !L2 - Use L4 in the mixer to activate P3 to roll
L5 AND L2 !L1 - Use L5 in the mixer to activate P3 to yaw
L6 AND L1 L2 - Use L6 in the mixer to control whatever else you want, or just don't use it..
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Using Trn Swith to turn P3 on
awsome thanks man, i just set the switches in for l4 and l5 inside the P3 in their respective channels
but i did have to move my alarms down to figure it out i could use L6 to control pitch on my gimbal
Youtube video of it working
but i did have to move my alarms down to figure it out i could use L6 to control pitch on my gimbal
Youtube video of it working
Last edited by raserdk on Sun Mar 01, 2015 7:51 pm, edited 1 time in total.
Re: Using Trn Swith to turn P3 on
Great.. Keep monitoring the thread from the link above as Mike has been developing a feature that could do the job even better.. Increasing/decreasing GVARs. Hopefully that will fit on the 9x radio.
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- MikeB
- 9x Developer
- Posts: 18000
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Using Trn Swith to turn P3 on
If nothing else, the L1L2 type increment and clear are already in the er9x code.
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Using Trn Swith to turn P3 on
That is awesome idea !