How is that 'request' triggered? By powering on the 'locator receiver'?The SX1276 module in oXs is in listening mode: it sent data only when it receives a request from the "locator receiver"
br KH
Moderator: rainer
How is that 'request' triggered? By powering on the 'locator receiver'?The SX1276 module in oXs is in listening mode: it sent data only when it receives a request from the "locator receiver"
Well I have just finished a project using the 128x32, and when doing my research I have read that for the 128x64 we need to modify the library, and select rhis display.rmd4u wrote:Thanks for the answer,
the I2C address of the OLCD is the same for both versions
#define I2C_ADDRESS 0x3C
That's not the problem.
Hi,
Every line of the code confuses me, sorry (but not because of the code ). I've attached manually edited config files. Reference voltage changed to 3300mV and the second baro sensor in oXs_config_advanced deactivated (only, because it is very unusual to have a second one). It compiles fine, but I have no clue, why the autogenerated files do not compile - this is a question for mstrens.
Mike, I presume this change is mainly (only) in oXs_out_frsky.cpp.