My Taranis arrived today with the well documented issue of the throttle stick not staying fully down.
It would spring back up a few notches.
I opened the case and finally worked out how to adjust that, and took the ratchet tension off and a few other spring adjustments to suit.
Now I can't calibrate it to go full 100% down. It's sitting around 76% in the Channel Monitor screen. It shows 100% in the full up movement.
Any ideas what I can do ?
TIA
Low Throttle Setting ?
-
- Posts: 109
- Joined: Sat Feb 16, 2013 10:28 am
- Country: Australia
- Location: Sydney
-
- Posts: 109
- Joined: Sat Feb 16, 2013 10:28 am
- Country: Australia
- Location: Sydney
Re: Low Throttle Setting ?
It's ok,
The trim was the problem
The trim was the problem
Re: Low Throttle Setting ?
Same problem here. Removed the centering spring ...