Page 2 of 2
Re: Manuals for 9XR Pro
Posted: Sat Jan 02, 2016 9:48 pm
by indept
Are there any new manuals? the one I have: ER9x_Manual_2015-v01.odt 2015-02-22 has somewhat different menu content than my radio has? I am running R218j firmware.
Re: Manuals for 9XR Pro
Posted: Sat Jan 02, 2016 10:14 pm
by jhsa
Er9x manual is the closest one at the moment.. The new ersky9x manual is being written as far as I know..
João
Re: Manuals for 9XR Pro
Posted: Sat Jan 02, 2016 10:19 pm
by indept
Ok, Thanks
Manuals for 9XR Pro
Posted: Mon Jan 04, 2016 5:18 am
by Daedalus66
jhsa wrote:Er9x manual is the closest one at the moment.. The new ersky9x manual is being written as far as I know..
João
It is indeed, but don't hold your breath, as it takes time.
Meanwhile, the 2015 Er9x manual is a pretty good guide to the menus and features.
Re: Manuals for 9XR Pro
Posted: Tue May 17, 2016 4:16 am
by MeSoLost
My Turnigy 9XR-pro came with ersky9x r212 and everything was ok but when i upgraded to the newest r218 why the heck is my hardware menu completely disabled? I just got this thing specifically to be upgraded. What's the point if you're completely removing the support? So I guess I'm stuck running r212 if I want to do any mods. Is this right?
Re: Manuals for 9XR Pro
Posted: Tue May 17, 2016 6:53 am
by jhsa
The hardware menu was hidden to prevent you or someone else from messing up your radio completely. It wasn't removed
To access the hardware menu just turn the radio ON while holding the left horizontal trim to the left for a second or two, and then release it.
João
Re: Manuals for 9XR Pro
Posted: Tue Jan 17, 2017 4:17 pm
by Rally205
Hi,
I am not sure if it is me doing something stupid but I think that there is a problem with the ersky9xr explained pdf. I can not print it. It will only print up to page 10. If I try to print it using Acrobat then it will not even start and just says no page was selected. If I use different software as I say it will print up to page 10.
I have tried downloading the file several times in case it was corrupted but still the same. I can read it fine on my pc but I like to print pdf files so that I can quickly flick through and mark items of interest etc. Any ideas?
Thanks
Marcus
Re: Manuals for 9XR Pro
Posted: Mon Jan 23, 2017 12:04 am
by Daedalus66
It prints fine for me. I think the problem is in your PC.
If you want to PM me with your email, I can send you another version of the PDF.
Re: Manuals for 9XR Pro
Posted: Sun Mar 12, 2017 11:26 pm
by Paulo
Hello
I accidentally erase the firmware from my turnigy 9xrpro... help please!
I have tried reinstall it as previous with SAM-BA v2.16 and without any success.
Can anyone please help me?
thanks,
Paulo.
Re: Manuals for 9XR Pro
Posted: Mon Mar 13, 2017 2:19 am
by Daedalus66
What exactly did you do?