ER9X and big Lama

[old31]

Hello all:
I just flash the firmware with ER9X, but I do not have to programming my TX for my helicoptere.I 'have a Big Lama and I would like to add a pot on channel 5 for controlling the objective of FlyCAM, a interuptor all or nothing on channel 6 for the start or stop of the FlyCAM and another switch on the channel 7 for night lighting.
Sorry for my English, but if you could give me a walking track, I'd be very happy.
Thank you for your answers.

[gohsthb]

Try this file for setting up your heli:
http://er9x.googlecode.com/svn/trunk/do ... mplate.pdf

Then try this one for examples of setting up some different mixes:
http://er9x.googlecode.com/svn/trunk/do ... amples.zip

-Gohst

[kaos]

Are you talking about you have a 4 ch coaxial Big Lama? and what Flycam you have? The only "Flycam" i can find on the web is way too heavy for a Esky Big Lama to carry.
or you are flying a Esky Big Lama with its original Tx and just want to use the er9x to control the 'Flycam'?
To control all those 3 things you are asking can be achieved easy with er9x, but you have to have proper interface/switch to connect to your 'Flycam'.
May be you need to give more detail about your Big Lama and Flycam.

[minbari]

hate to bring up an older thread, but I am about to buy a lama v4. it says it uses "spread spectrum dsk" is this a form of dsm2/dsmx or can er9x with the standard module control this sucker?

[kaos]

I doubt it.