FrSky telemetry sharing the ribbon with USBASP?

General mods that are considered worth doing; regardless of the end firmware you use.
Post Reply
JayC
Posts: 21
Joined: Tue Aug 27, 2013 12:03 pm
Country: -

FrSky telemetry sharing the ribbon with USBASP?

Post by JayC »

I wonder if this would work... in the wiki and other sources the telemetry always uses separate wires from the CPU to the back board. As I have the USBASP on the back board, I realised MISO and MOSI are readily in the ribbon!

Comments?

Image

Image

User avatar
Kilrah
Posts: 11108
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: FrSky telemetry sharing the ribbon with USBASP?

Post by Kilrah »

Looks fine!
User avatar
LTMNO
Posts: 1049
Joined: Fri Nov 30, 2012 9:31 pm
Country: Canada
Location: Toronto, Canada

Re: FrSky telemetry sharing the ribbon with USBASP?

Post by LTMNO »

JayC wrote:
Image
Great Mod, very clean...

just curious as to what you have going on on the top right with resistor and transistor i think?

Thanks
Custom 9x with M64/Telemetry Mod
User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: FrSky telemetry sharing the ribbon with USBASP?

Post by jhsa »

Backlight control. It connects to pin 17 of the processor. :)

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
User avatar
LTMNO
Posts: 1049
Joined: Fri Nov 30, 2012 9:31 pm
Country: Canada
Location: Toronto, Canada

Re: FrSky telemetry sharing the ribbon with USBASP?

Post by LTMNO »

ah, thanks... amazing.. ;-)
Custom 9x with M64/Telemetry Mod

User avatar
SR71
Posts: 109
Joined: Tue Feb 28, 2012 10:21 pm
Country: Italy
Location: Rome

Re: RE: FrSky telemetry sharing the ribbon with USBASP?

Post by SR71 »

Best looking mod ever seen !
Which kind of wire is the blue one ?
User avatar
MikeB
9x Developer
Posts: 17990
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: FrSky telemetry sharing the ribbon with USBASP?

Post by MikeB »

It looks like kynar, wire-wrapping wire, to me. I use white kynar for my mods. It is solid core, and the insulation doesn't 'melt' when soldering.

Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
User avatar
ShowMaster
Posts: 4327
Joined: Thu Dec 29, 2011 3:44 am
Country: -
Location: Los Angeles, CA USA

Re: FrSky telemetry sharing the ribbon with USBASP?

Post by ShowMaster »

MikeB wrote:It looks like kynar, wire-wrapping wire, to me. I use white kynar for my mods. It is solid core, and the insulation doesn't 'melt' when soldering.

Mike.
+1. My favorite go to mod wire.

Post Reply

Return to “Electronic Mods”