openrcforums

Hi Guys,
i bought a used Nano Balde CPX, OrangeRx Module and a brand new Tunigy 9x.
But the Motor will not work i think the Throttle Hold is wrong configured, the rest work well.
Can i control a CPX with the stock firmware?

(Sorry for my bad english)

Not with stock firmware and Orange module, no. Your 9X is putting out the throttle signal on channel 3, while the CPX expects it on channel 1. And the other way around with elevator.

Thanks for the answer.
Okay than i flash them the next days, but with the er9 Firmware it will be no problem or?

No problem once reflashed.