eePe Announcements
- MikeB
- 9x Developer
- Posts: 17995
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: eePe Announcements
Do you have QtCreator installed?
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: eePe Announcements
No.. I don't know what is needed..
By the way, good move on allowing only one instance of the simulator when more than one model editor is open.
Thanks
By the way, good move on allowing only one instance of the simulator when more than one model editor is open.
Thanks
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- MikeB
- 9x Developer
- Posts: 17995
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: eePe Announcements
Usual problem is things keep being updated. I'm still running QT 4.7.4 as it works. If you download the latest, it may not be 100% compatible. Might be worth trying it though.
http://qt-project.org/downloads
Is where to get it.
This is a full IDE that lets you look at/edit the screens graphically, edit the sources and then just hit a button to compile and run it. It includes the ability to run under debug and set breakpoints.
Mike.
http://qt-project.org/downloads
Is where to get it.
This is a full IDE that lets you look at/edit the screens graphically, edit the sources and then just hit a button to compile and run it. It includes the ability to run under debug and set breakpoints.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
-
- 9x Developer
- Posts: 1109
- Joined: Sat Dec 31, 2011 12:11 am
- Country: -
- Location: Massa (MS), Tuscany, Italy
Re: eePe Announcements
Still another small bug Mike:MikeB wrote:File added.
Mike.
mainwindow.cpp:58:26: fatal error: serialDialog.h: No such file or directory
On linux/unix operating system case matters...
the file is named serialdialog.h you cannot include it as serialDialog.h
Re: eePe Announcements
thanks Mike.. will give it a try
João
wooow, 6Gb I will have to dump half of the c**p I have on my computer to be able to install that
João
wooow, 6Gb I will have to dump half of the c**p I have on my computer to be able to install that
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- MikeB
- 9x Developer
- Posts: 17995
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: eePe Announcements
Interesting, I'll check but I thought my build under linux in a virtualbox was working OK.Romolo wrote:mainwindow.cpp:58:26: fatal error: serialDialog.h: No such file or directory
On linux/unix operating system case matters...
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
-
- 9x Developer
- Posts: 1109
- Joined: Sat Dec 31, 2011 12:11 am
- Country: -
- Location: Massa (MS), Tuscany, Italy
Re: eePe Announcements
i see that in the repository is indeed stored as lower case letters...
I was trying to compile as João asked me to check if is possible to make window smaller... I found some issue in safety switches and model setup tabs...
in both tabs, there are indeed too many controls vertically stacked..., that's why in c9x we have custom switches in two columns.
I was trying to compile as João asked me to check if is possible to make window smaller... I found some issue in safety switches and model setup tabs...
in both tabs, there are indeed too many controls vertically stacked..., that's why in c9x we have custom switches in two columns.
Re: eePe Announcements
yeah, it is a problem that exists since the beginning that eepe don't fit in some small laptop screens. really annoying and that came into conversation yesterday
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- ShowMaster
- Posts: 4327
- Joined: Thu Dec 29, 2011 3:44 am
- Country: -
- Location: Los Angeles, CA USA
Re: eePe Announcements
My netbook screen size is locked and I've always missed the higher channels display on the sim and some other screens. My netbook is my field computer I use to update my TXs or others that need help. It would be great if eepe's display size was flexible in the future.
Re: eePe Announcements
I just tried the latest version on my laptop. I'm now able to see the bottom channels on the simulator.. but not able to see the simulate tab on the editor
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- MikeB
- 9x Developer
- Posts: 17995
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: eePe Announcements
Its probably because while I'm compiling under linux, the files are on a "network" drive under windows. I'll fix mainwindow.cpp anyway.
SM: Is the Sim any better now?
Mike.
SM: Is the Sim any better now?
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
- MikeB
- 9x Developer
- Posts: 17995
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: eePe Announcements
I've managed to squeeze the height of the model edit window down to 645. This will be in the next revision.
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: eePe Announcements
Thanks Mike
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- MikeB
- 9x Developer
- Posts: 17995
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: eePe Announcements
New revision released.
Simulator fix heli bug (eepe & eepskye)
Add CH% support for timer trigger (eepe)
Mike.
Simulator fix heli bug (eepe & eepskye)
Add CH% support for timer trigger (eepe)
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: eePe Announcements
somehow eepe and erskye are not seeing the new release. so is the er9x and ersky9x.
- MikeB
- 9x Developer
- Posts: 17995
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: eePe Announcements
I just did a "check for updates" and all new files were reported.
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: eePe Announcements
just checked again, this is what I get:
same with eeskye r389, last fw r186, after check for update, "no update available".
eepe is r389.same with eeskye r389, last fw r186, after check for update, "no update available".
- MikeB
- 9x Developer
- Posts: 17995
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: eePe Announcements
Odd, rechecked and all is OK. Maybe, for some reason, you aren't getting the connection to the googlecode site.
Anyone else with this problem?
Mike.
Anyone else with this problem?
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: eePe Announcements
I just updated eepe and the radio.. eepe detected the latest version as always.. but it was set to the atmega128. don't know if it is different with the ersky9x..
Mike, you addded only the ch% to the timer, right? no Ch? I'm asking because I normally use the thr only to trigger the timer..
João
Mike, you addded only the ch% to the timer, right? no Ch? I'm asking because I normally use the thr only to trigger the timer..
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: eePe Announcements
OK, the only difference I may have a little differently is I do have a copy of "eepskye r381.exe" in the eepe directory (I renamed the r381 version of eepskye.exe to eeskye r381.exe). and I created 3 short cuts for each version. while the normal eepskye.exe is being updated I still get to keep the eepskye r381, cause that is my 'flying' Tx uses with ersky r178 which I know there is no reported glitches in.
Could the coexistence of "eepe.exe" "eesskye.exe" and "eepskye r381.exe" cause such problem?
I never update the FW via "eepskye r381.exe" after r178 but I did with "eeskye.exe" to down load the ersky9x r186 and stored in a folder. and the "eepskye r381.exe" also show the last version is r186 which is correct ask if I want to update to r389 and that is correct too.
Sounds complicated?
I don't think that would cause this issue. But both eepe.exe and eepskye.exe is not updating either the GUI nor the FW for Tx today.
Yesterday I had no problem updating from previous version of both eepe or eepskye to r389 (that is now the eepskye.exe) or r186 and r807.
Could the coexistence of "eepe.exe" "eesskye.exe" and "eepskye r381.exe" cause such problem?
I never update the FW via "eepskye r381.exe" after r178 but I did with "eeskye.exe" to down load the ersky9x r186 and stored in a folder. and the "eepskye r381.exe" also show the last version is r186 which is correct ask if I want to update to r389 and that is correct too.
Sounds complicated?
I don't think that would cause this issue. But both eepe.exe and eepskye.exe is not updating either the GUI nor the FW for Tx today.
Yesterday I had no problem updating from previous version of both eepe or eepskye to r389 (that is now the eepskye.exe) or r186 and r807.
Re: eePe Announcements
I've just launched eepskye and it asked me if I wanted to download r188, so I guess is all good?
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: eePe Announcements
which version you had? eepskye and ersky9x?
edit: I just uninstalled eepe and reinstalled an old version r379 and restart. it asked me to update to r389 which I did. and r389 was installed. But the same thing:
current version r807. check-> no newer version. same with eepskye.
edit: I just uninstalled eepe and reinstalled an old version r379 and restart. it asked me to update to r389 which I did. and r389 was installed. But the same thing:
current version r807. check-> no newer version. same with eepskye.
Re: eePe Announcements
got the latest eepe, eepskye, and then this version asked me if I wanted to download the latest ersky9x.. That is how it's supposed to be I believe?
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: eePe Announcements
This morning I tried again. then the new eepe r391 showed up. after download r391 now it is getting the r808 er9x.
Very strange.
Mike: did you do anything with eepe or the site yesterday?
Very strange.
Mike: did you do anything with eepe or the site yesterday?
- MikeB
- 9x Developer
- Posts: 17995
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: eePe Announcements
No.
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: eePe Announcements
that is really strange. hmmmm
- MikeB
- 9x Developer
- Posts: 17995
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: eePe Announcements
I've been "playing" with telemetry. I have a second tab in the telemetry display. If you connect a serial port to the telemetry pinson the back of a DJT module, you now get values displayed for A1 A2 and the RSSI values.
My initial reason for doing this is to provide a means to configure the alarm settings in the Tx module from within eepe/eepskye. I may, however, extend the functionality to display all the telemetry data for test purposes.
Mike.
My initial reason for doing this is to provide a means to configure the alarm settings in the Tx module from within eepe/eepskye. I may, however, extend the functionality to display all the telemetry data for test purposes.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
- ShowMaster
- Posts: 4327
- Joined: Thu Dec 29, 2011 3:44 am
- Country: -
- Location: Los Angeles, CA USA
Re: eePe Announcements
Excellent Mike. I used the original Frsky module data pgm and later the one I believe the megasound designer developed I liked better. As soon as er9x supported setting the DJT RSSI level I stopped using all computer programs. Mainly I wanted to set the factory RSSI to 43 or low enough to reduce the random RSSI beeps. After that I let er9x worry about the levels.
I think you mentioned not using or wiring RXD usually to pin 2 on the DJT module, or supporting it in er9x in the future. I'm not sure if it was to save code space or for better hardware comparability?
In any case we would lose the ability to change the factory set internal RSSI value.
If I'm understating your post here, you'll add that feature in eepe so with a serial able we'll be able to set the internal DJT or DHT alarm values via the data port and eliminate that module mod requirement. In fact if a cable is used to connect the same data connector into the 9x er9x mod through the 9x case back, no module mod is required at all. All just plug in and keep it stock.
I like that idea for those worried about voiding the Certs on their approved unmodified modules.
Win win. That was the missing feature but it will require a USB to serial adapter to a 3 pin FM servo connector. Easy enough to do.
Sent from my iPod touch using Tapatalk
I think you mentioned not using or wiring RXD usually to pin 2 on the DJT module, or supporting it in er9x in the future. I'm not sure if it was to save code space or for better hardware comparability?
In any case we would lose the ability to change the factory set internal RSSI value.
If I'm understating your post here, you'll add that feature in eepe so with a serial able we'll be able to set the internal DJT or DHT alarm values via the data port and eliminate that module mod requirement. In fact if a cable is used to connect the same data connector into the 9x er9x mod through the 9x case back, no module mod is required at all. All just plug in and keep it stock.
I like that idea for those worried about voiding the Certs on their approved unmodified modules.
Win win. That was the missing feature but it will require a USB to serial adapter to a 3 pin FM servo connector. Easy enough to do.
Sent from my iPod touch using Tapatalk
- MikeB
- 9x Developer
- Posts: 17995
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: eePe Announcements
That's the general idea. You will need a 4-pin connector for the module, the pins are:
RxD
TxD
+5V
Gnd
For this, I've also got shared source files for both eepe and eepskye so they will both get the same facilities together.
Mike.
RxD
TxD
+5V
Gnd
For this, I've also got shared source files for both eepe and eepskye so they will both get the same facilities together.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: eePe Announcements
I would guess I can use the frsky serial adapter that I use to update the sound module, right? Also can I use this feature with a modified DJT and with it inserted in the radio? Thanks.
Joao
Sent from my GT-I9195 using Tapatalk
Joao
Sent from my GT-I9195 using Tapatalk
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW