I know, it's somewhere but I don't find the pin assignment in the module bay.
Does anybody know?
regards
manu
pin assignment module bay
-
- Posts: 277
- Joined: Sun May 06, 2012 8:37 pm
- Country: -
- Location: Fond du Lac, WI
Re: pin assignment module bay
Pins 2 and 4 are ground on mine, connected by the same trace.
- ShowMaster
- Posts: 4327
- Joined: Thu Dec 29, 2011 3:44 am
- Country: -
- Location: Los Angeles, CA USA
Re: pin assignment module bay
c You're correct for the Turnigy and FlySky series of radios.pmullen503 wrote:Pins 2 and 4 are ground on mine, connected by the same trace.
JR needs +6V for their modules like 72 or 50 or 35 MHz.
FYI
The Frsky DJT module normally leaves those two pins unused/open so it can be used in any JR pinout tx.