When i go into the "display" screen the aileron bar is reading 100% but when i move the toggle the bar does not move (all other bars move when toggles are moved). Any thoughts on what has gone wrong? 
Ailerons stuck on
Ailerons stuck on
Hi evryone. I seem to have no input into my ailerons. I was playing around with the settings/mixing and lost control of them. I got to the point where i did a Factory restore but it still did not fix the problem. I have the servos etc in the right way. When i go into the "display" screen the aileron bar is reading 100% but when i move the toggle the bar does not move (all other bars move when toggles are moved). Any thoughts on what has gone wrong?
When i go into the "display" screen the aileron bar is reading 100% but when i move the toggle the bar does not move (all other bars move when toggles are moved). Any thoughts on what has gone wrong? 
Re: Ailerons stuck on
On which channel is your aileron connected, and what do you have on the mixer screen for that channel?
Re: Ailerons stuck on
ailerons are on 1 and by the mixer channel do you mean program mix?
Re: Ailerons stuck on
you have the stock firmware on your radio, right?
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Ailerons stuck on
Ah. Moved to stock firmware section.
Re: Ailerons stuck on
how would i do that>>
Re: Ailerons stuck on
When i turn the flaperon from "INH" to "ACT" it changes the input. the display shows that if the flaperon is "INH" the ailerons are 100% but if the flaperon is "ACT" the ailerons are 0%. Either way though there is no bar movement on the "display" screen when the aileron toggle is moved. i was trying to set up the flaperons when the problem occured. 
Re: Ailerons stuck on
Sorry, I know nothing about the stock firmware. Most here got rid of that quite quickly.
-
ShowMaster
- Posts: 4327
- Joined: Thu Dec 29, 2011 3:44 am
- Country: -
- Location: Los Angeles, CA USA
Re: Ailerons stuck on
Try posting your question here
http://www.rcgroups.com/forums/showthread.php?t=1035575
Dedicated to the stock firmware 9x.
Good luck
SM
ShowMaster
Sent from my iPod touch using Tapatalk
http://www.rcgroups.com/forums/showthread.php?t=1035575
Dedicated to the stock firmware 9x.
Good luck
SM
ShowMaster
Sent from my iPod touch using Tapatalk
Re: Ailerons stuck on
Can you change the 0% to 100 when it reads 0? That sounds like your problem.
-Gohst
Sent from my LG-P999 using Tapatalk 2
-Gohst
Sent from my LG-P999 using Tapatalk 2
-
omegamanuk
- Posts: 4
- Joined: Sat Dec 08, 2012 12:41 pm
- Country: -
Re: Ailerons stuck on
I had somthing similar and it was a bad solder conection on the pot, weather was very cold and guess the contraction was enough to break the contact.
-
ShowMaster
- Posts: 4327
- Joined: Thu Dec 29, 2011 3:44 am
- Country: -
- Location: Los Angeles, CA USA
Re: Ailerons stuck on
I've had to repair several Turnigy TXs that came with water damage?
Switches and aux pots were not working or acting weird. Pot spray/lube fixed the pots and all new switches fixed the shorted or open switches, what a pain but good to go.
My ohm meter paid for itself because I couldn't believe they were all messed up at first.
SM
Switches and aux pots were not working or acting weird. Pot spray/lube fixed the pots and all new switches fixed the shorted or open switches, what a pain but good to go.
My ohm meter paid for itself because I couldn't believe they were all messed up at first.
SM