Hi,
I just tried to download Open9x with frsky, audio, haptic and templates options and companion said that firmware will not fit into the flash.
Ain't that combination been possible to choose ages ago? Altough then that audio option was speaker if I remember correctly but anyway!? What is wrong here?
All what I want is that cool speaker sounds which can vary a little with some vibration at the same time and frysky (telemetry) with example mixer templates.
Like we have here ->
http://www.youtube.com/watch?v=2yA09EzQa7c
Firmware does not fit in flash -error
Firmware does not fit in flash -error
What goes up, must come down. -Isaac Newton
OpenTX - expanding possibilities
OpenTX - expanding possibilities
- Rob Thomson
- Site Admin
- Posts: 4543
- Joined: Tue Dec 27, 2011 11:34 am
- Country: United Kingdom
- Location: Albury, Guildford
- Contact:
Re: Firmware does not fit in flash -error
Try turn off the 'splash screen' option. That normally gives the space you need.
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
Re: Firmware does not fit in flash -error
Thanks! That did the trick. But no cool splash anymore...
What goes up, must come down. -Isaac Newton
OpenTX - expanding possibilities
OpenTX - expanding possibilities
Re: Firmware does not fit in flash -error
Templates use a ton of flash. You'll likely not need them for long, so once you can do without you'll be able to add more stuff. All templates are also available in companion9x if needed.
Re: Firmware does not fit in flash -error
Actually I haven't never used templates but once when we we're in one RC-event with our club members I wanted to make a mix for flying wing and didn't succsee. And that time I didn't have those templates in my radio. I figured out the mixing later on but then I decided I will carry templates with me. But... I'm far more familiar with the software (mixer) now and I think I can left those templates out from firmware.
What goes up, must come down. -Isaac Newton
OpenTX - expanding possibilities
OpenTX - expanding possibilities