openrcforums

English open9x video:
http://ok-rimr.com/en/how-to-do-it/turn ... pen9x-uvod

English companion9x video:
http://ok-rimr.com/en/how-to-do-it/turn ... ompanion9x



Bertrand.

Nice!

I will add these links to the wiki

Rob

Done...

http://openrcforums.com/wiki/index.php/ ... ng_your_9x

Just watched the whole set!

Excellent work

I have learnt about some features I did not know existed!

Bonjour,
J'essaie de suivre la progression de cette radio, mais n'étant pas anglophobe vous n'auriez pas les mêmes vidéos en français s'il vous plait ?
diiity

I found these videos a while ago and they really are great - just be sure to check the " T9x + Er9x - Step by Step - Lesson x" vids too!
In his last (open9x) lesson he said (if i understood correctly) that he would make similar vids for open9x

diiity wrote:Bonjour,
J'essaie de suivre la progression de cette radio, mais n'étant pas anglophobe vous n'auriez pas les mêmes vidéos en français s'il vous plait ?
diiity

Who wants to contribute and translate these videos in french?

<fr>Qui s'y colle ?</fr>

Bertrand.

I've made a series of videos anticipating the release of the Taranis powered by OpenTX.
The most recent is a salute to the guys that do all their work through their transmitter screen rather than using Open9x. It's on the General settings screens.
http://youtu.be/RHQCsIR21Ig

I've a total of 8 videos in this series on my channel http://www.youtube.com/user/PagesFlyingCircus

My newest video was uploaded tonight. It was a cluster trying to do this one but does meet my objective of outlining how to prepare sounds for use with OpenTX. It also has a quick demonstration of recording sounds. To record sounds you only need a simple microphone with a 3mm (1/8") mono plug.

You can create synthesized voice sounds @ http://www2.research.att.com/~ttsweb/tts/demo.php

Using this website you can put a one second space between each word/phrase by putting <Break time="1s"/> between each phrase -- sort of like this
High Rate Elevator <Break time="1s"/> Low Rate Elevator <Break time="1s"/> 3D Rate Elevator <Break time="1s"/> Student in Control <Break time="1s"/> Instructor in control
When you click Download to download the sound file you'll then need to right click on the link to the .WAV file and choose save as.... After this is saved it will need to be converted to WAV_Ulaw or WAV_Alaw using a technique similar to those I outline in the video below.

http://youtu.be/yiibsVzJW8w

I uploaded a new video today.
http://youtu.be/YMObu3zj4Ok

This video is done entirely in the TX simulator - with no use of the Open9x companion. I start from scratch and set up a 5 channel airplane with throttle, elevator, rudder, and two ailerons, each on a separate channel. I then add two different rudder mixes in which placing switch E in the up position will give 20% opposite aileron to the rudder and switch E in the middle position will give 10% opposite aileron to the rudder. Switch E in the down position will be the default with no coordination between the mixes.

There has been some interesting discussion in RCG about using opposite AIL to counter the roll from the rudder. The point of the video is to illustrate how to do this stuff, it's not actually how I do it.

Due to requests I have made a video of using OpenTX / Open9x using a 9x radio. This is similar to part of my videos using the Taranis, but uses the key layout of the 9x radio. It covers all of the basics needed to get a person up and running with radio setup in general settings, and setting up mixes - rates - and expo. The video is 30 minutes long -- but I don't think I could have covered it any quicker.

http://youtu.be/QU_PrRosKZw

Hope it helps with support.

Scott...

As you have been creating such good videos, I thought it a good idea that they start getting cataloged in one place.

You will notice there is now a video guides icon on the right of the forum ->

This takes you to the video section on the wiki.

Could you please add the videos in to this page? Simply logon to the wiki with your forum username & password. If you look at the existing page content - you should be able to work out how to add the links / edit text to suit?

Many thanks

Rob

I have just put in links for them and cleaned up the page.

Feel free to add / clean some more

Thanks. I'm not good at keeping up with "paperwork". Today I created a new video -- but it's actually only an overview of a huge map I made of all of the screens of OpenTX on a 9x radio. I'll make another map of the OpenTX screens on a Taranis once that's all finalized.

Making videos is for sure more fun than paperwork

It's been a Loooong time since I edited the video guide pages. http://openrcforums.com/wiki/index.php/ ... anis_radio I took a few minutes today to add the new videos and add the dates to the descriptions of my videos. I also ordered the videos chronologically.

New video today on Binding receivers to the FrSky Taranis. It includes the difficult to bind (if you have the patience I do) Delta-8 receiver. It's in HD so expand that screen.

[BBvideo 425,350]http://youtu.be/YTgGU3BMjPA[/BBvideo]

Links posted are obsolete. Please update or delete post.