Hey guys, im new in the fpv game and currently struggeling with the binding. I hope this topic is okay here.
I bought an Cineape 25 with an ELRS Receiver (Frsky XM/XM+/R-) and the tlite jumper v2.
In all the tutorials the people show how they choose at Internal RF "Multi"and then do the settings for Frsky.
But at my Radio I can just choose as internal RF "XJT"and only D16.
Im trying to solve that for two days now..
Thanks for your help guys
How to bind Jumper-Multi not available
-
- Posts: 4
- Joined: Sat Jan 20, 2024 1:50 pm
- Country: Germany
Re: How to bind Jumper-Multi not available
ELRS and FrSky are diffrerent things, so which did you get?
-
- Posts: 4
- Joined: Sat Jan 20, 2024 1:50 pm
- Country: Germany
Re: How to bind Jumper-Multi not available
There is only written 2.4G Elrs Receiver for the quad. But is it possible that XJT is not compatible with ELRS?
I bought this radio:
https://usa.banggood.com/JumperRC-T-Lit ... mds=search
and this drone in the elrs version :
https://usa.banggood.com/DarwinFPV-Cine ... 6466311769
Re: How to bind Jumper-Multi not available
Did you buy the radio in the ELRS version too?
-
- Posts: 4
- Joined: Sat Jan 20, 2024 1:50 pm
- Country: Germany
Re: How to bind Jumper-Multi not available
I ordered the ELRS version but I can see neither the choices I would have with the 4 in one nor I can see ELRS.
The only option I see is XJT.
My question is if XJT is used with the same hardware than ELRS and I just dont get it to bind it correctly or if they delivered me the wrong radio?
The only option I see is XJT.
My question is if XJT is used with the same hardware than ELRS and I just dont get it to bind it correctly or if they delivered me the wrong radio?
Re: How to bind Jumper-Multi not available
The radio is probably correct but with the wrong firmware loaded, check what version is on there.