Page 1 of 1
Trim change with rates
Posted: Mon Aug 28, 2023 10:25 pm
by plasticbaldy
When I switch to a higher rate by having separate mixes with switches selecting the mix the trim drastically changes. This only occurs on the elevator servo.
Re: Trim change with rates
Posted: Mon Aug 28, 2023 10:26 pm
by plasticbaldy
I haven’t updated the firmware for about 4 years.
Re: Trim change with rates
Posted: Tue Aug 29, 2023 5:52 pm
by MikeB
A mix with a weight other than 100% will affect the trim setting.
The "best" way to handle rates is to use the "Expo/D.Rate" menu as this applies the rate setting to the stick input and doesn't affect the trim in a mix.
Mike
Re: Trim change with rates
Posted: Fri Sep 01, 2023 9:46 pm
by plasticbaldy
Thanks Mike,
I’ll have a go at that as soon as I get the chance to play again.