Page 1 of 1
Upgrading with 3DFused CR-10 X-Axis Linear Rail Kit
Posted: Sat Mar 18, 2023 2:36 pm
by bob195558
Upgrading with 3DFused CR-10 X-Axis Linear Rail Kit
- 3DFused X axis LinearRail_c.jpg (101.68 KiB) Viewed 2181 times
- 3DFused X axis LinearRail_d.jpg (101.03 KiB) Viewed 2174 times
CR10 X-Axis Rail Kit (300MM Build Volume):
https://3dfused.com/product/xaxis300/
The Hotend/Extruder I am using is the TH3D Tough Direct Drive Heatsink Extruder with the V6 All-Metal Hotend.
More info is found here:
viewtopic.php?f=129&t=12501&sid=52e153c ... 91d4394d90
There is a trouble when using a Hotend/Extruder together, as when pulling a new full 1 KG roll,
the weight of the new roll pulls harder until about ½ inch of the diameter is used up.
So every time when the X-axis travels to the right and needs to pull out more filament,
this causes the Hotend/Extruder to flex a little distorting the 3D print.
The three roller-wheels that use the metal aluminum-extrusion to travel on is where this flexing is occurring.
So I decided to upgrade this X-axis to hopefully correct this trouble.
Re: Upgrading with 3DFused New CR-10 X-Axis Linear Rail Kit
Posted: Sun Mar 19, 2023 1:00 am
by bob195558
Re: Upgrading with 3DFused New CR-10 X-Axis Linear Rail Kit
Posted: Sun Mar 19, 2023 2:17 am
by bob195558
There was a trouble with the belt alignment, which when the X-axis traveled to each end of the Linear Rail,
the black 3D-printed Belt Clamp Fixture was misaligned with the belt pulleys.
- Backside Belt Clamp Fixture
- 3DFused Belt Clamp Fixture_AAa.jpg (147.8 KiB) Viewed 2154 times
To correct this trouble, I dissembled the Belt Clamp Fixture and removed the two M3 nuts
and drilled all the way through so that the the M3 screws can be assembled from either side.
Next I was able to flip the Belt Clamp Fixture around to the other side, which aligned the X-axis belt correctly.
Reassembled the two M3 nuts and the two belt ends.
With the belt aligned being proper now, I was able to move to the next step of this upgrade.
- New Frontside Belt Clamp Fixture
- 3DFused X axis LinearRail_Ee.jpg (158.03 KiB) Viewed 2166 times
- 3DFused X axis LinearRail_B2bb.jpg (130.55 KiB) Viewed 2166 times
- 3DFused X axis LinearRail_B2aa.jpg (105.11 KiB) Viewed 2166 times
- Backside Belt Clamp Fixture
- 3DFused Belt Clamp Fixture_BBb.jpg (122.31 KiB) Viewed 2151 times
Re: Upgrading with 3DFused New CR-10 X-Axis Linear Rail Kit
Posted: Sun Mar 19, 2023 3:11 pm
by bob195558
I use the TH3D Titan (Aero) Tough Direct Heatsink Hotend/Extruder
and the 3DFused New CR-10 X-Axis Linear Rail Kit comes with a Mounting Plate,
which I milled out two hole to a larger size.
- 3DFused Mounting Plate_cc.jpg (205.13 KiB) Viewed 2155 times
The smaller holes which have M3 threads, I was able to use to help secure a new Aero Hotend/Extruder Fixture.
- New Aero Hotend Extruder Fixture_cccc.jpg (174.7 KiB) Viewed 2155 times
- 3DFused X axis LinearRail Plate_Cc.jpg (155.45 KiB) Viewed 2151 times
- New Aero Hotend Extruder Fixture_Nn.jpg (145.22 KiB) Viewed 2151 times
- New Aero Hotend Extruder Fixture_Mm.jpg (156.92 KiB) Viewed 2151 times
Re: Upgrading with 3DFused CR-10 X-Axis Linear Rail Kit
Posted: Mon Mar 27, 2023 2:59 pm
by bob195558
A little bit of info about 3DFused.
3DFused is a small company and normally they do not carry much inventor of there products.
So when you place an order with them you need to be patient as they need time to make your ordered items.
It may take up to about 90 days before you receive your order with them.
I made weekly inquiries of the progress of my order and they always replied back to me with an update.
This was very helpful to me as it gave me confidence that they had not forgotten me and my order with them.
It was about 66 days for delivery and I was very pleased with the quality of the product.
My 3D-Printer is the older CR10 and so I did need to fit the 3DFused CR-10 X-Axis Linear Rail Kit to it,
as you can view my documented adjustments for fitting it into place.
Also because of inflation the cost is not that high, so I would recommend this upgrade.
I am very happy with it.