Page 1 of 1
X9d back board component[SOLVED]
Posted: Sun Mar 05, 2023 9:50 am
by OctavioS
Usb connection is not working with my x9d turned off. It is recognized on pc, as I see stm32bootloader on device manager, but I cannot flash, since an error occurs.
Later I realize that
download/file.php?mode=view&id=20935 is shorting.
What component is it and is it the problem?
thx
Re: X9d back board component
Posted: Sun Mar 05, 2023 10:34 am
by Kilrah
That's a fuse, it's supposed to be short...
Re: X9d back board component
Posted: Sun Mar 05, 2023 3:03 pm
by OctavioS
Kilrah wrote: ↑Sun Mar 05, 2023 10:34 am
That's a fuse, it's supposed to be short...
It figures...
Thx for your reply. Do you know what might be wrong for not being able to flash in dfu mode?
Re: X9d back board component
Posted: Sun Mar 05, 2023 4:16 pm
by Kilrah
As long as the PC detects it the hardware should be fine and it's probably PC/driver problems.
Re: X9d back board component
Posted: Sun Mar 05, 2023 6:19 pm
by OctavioS
I will try again, but i never had a problem with updating a tx in dfu mode, in fact, just before this one i updated another taranis and all went ok, but i will give it another try.
Re: X9d back board component
Posted: Mon Mar 06, 2023 9:19 am
by OctavioS
When i try to flash through eepskye, a message appears "Tx disk not mounted" and simply wont flash.
At this time the radio wont power on anymore. Its completely dead.
Re: X9d back board component [SOLVED]
Posted: Mon Mar 06, 2023 10:04 am
by OctavioS
So it was a cable problem. All working.