Page 1 of 1
How to bind UMX Radian to OrangeRX module
Posted: Fri Sep 23, 2022 12:00 am
by N7LUF
I hope this might be the right place to ask this question.
I have Taranis -X9D+ and OrangeRX module, and can not bind a UMX Radian.
I am using OpenTX companion and just can not to get it all to bind.
Here is what I got from Amazon.
E-flite RC Airplane UMX Radian BNF Basic Transmitter Battery and Charger Not Included with AS3X and Safe Select EFLU2950 Airplanes ARF Electric
Really could use you help, PLEASE!
Re: How to bind UMX Radian to OrangeRX module
Posted: Fri Sep 23, 2022 7:14 am
by Kilrah
OrangeRX module needs PPM as input and is bound using the switch on it, nothing is handled by the radio.
Re: How to bind UMX Radian to OrangeRX module
Posted: Sat Sep 24, 2022 6:53 pm
by N7LUF
I am not sure what you mean with switch on it.
Does all the switches on the back of the OrangeTX be in the off positions.
I have been trying PPM with no luck.
Thank you for your reply
Re: How to bind UMX Radian to OrangeRX module
Posted: Sat Sep 24, 2022 7:19 pm
by Kilrah
You might want to clarify what you have, the well known orangerx module that was out when the dev was done doesn't have switches on it, but has a bind button you use to bind:
https://hobbyking.com/en_us/orangerx-ds ... tore=en_us
If yours is different check the manual/post a link to it.
Re: How to bind UMX Radian to OrangeRX module
Posted: Sat Sep 24, 2022 8:17 pm
by N7LUF
Sorry it took me awhile to find a link.
https://docplayer.net/54073315-Orangerx ... anual.html
I have switchwe on the back of the module.
This is the plane I am trying to bind.
https://www.amazon.com/dp/B09BZ3G7RK?ps ... asin_title
I have been able to bind without any problems using PPM to "E-flite UMX Ultrix BNF Basic with AS3X and Safe Select, 342mm, EFLU6450"
Not sure how to post a picture.
https://drive.google.com/drive/folders/ ... sp=sharing
