Highest Firmware Version For FrSky X9D Plus

Post Reply
PILOTJFITZ
Posts: 2
Joined: Tue Feb 15, 2022 11:20 am
Country: -

Highest Firmware Version For FrSky X9D Plus

Post by PILOTJFITZ »

I was just given an old FRSKY X9D Plus and total newbie regarding OpenTX. It currently has OpenTX V 2.0.19 So my question is, can I update all the way to the most recent Firmware or a version number I can't exceed, and if I can would I be required to do this in incremental steps or can I just jump to the latest firmware? None of my models are currently on the radio so I'm not concerned with losing any model files. Once I explore Open TX and learn more about it I plan to buy a new radio but wanted to get my feet wet with this one. Thanks!

User avatar
Kilrah
Posts: 11108
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Highest Firmware Version For FrSky X9D Plus

Post by Kilrah »

You can use latest version, update both firmware and SD card, and then do a "factory reset", recalibrate sticks and you'll start ffresh as new.
PILOTJFITZ
Posts: 2
Joined: Tue Feb 15, 2022 11:20 am
Country: -

Re: Highest Firmware Version For FrSky X9D Plus

Post by PILOTJFITZ »

Thanks for the reply! I'm a total newbie but there seems to be plenty of documentation here so I should be able to figure it al out. I am also converting My Walkera DEVO 10's to "Deviation Firmware" which is heavily influenced by OpenTx and the process seems quite similiar as far as firmware upgrades

Post Reply

Return to “openTx for FrSky radios”