Page 6 of 10
Re: ErskyTx on X20
Posted: Thu May 26, 2022 8:48 am
by MikeB
I'm trying to work out what is wrong. It seems there is a problem reading and writing data on the SD card. Screenshot files are being created, but no data is being written or not all the data.
Also, radio and model settings are also on the SD card and they are not being written either.
I'll see if I have a larger capacity card I can try to see if that is the problem, I have mostly 4Gb and 8Gb cards.
Mike
Re: ErskyTx on X20
Posted: Fri May 27, 2022 6:59 am
by jurajjurej
MikeB wrote: ↑Thu May 26, 2022 8:48 am
I'm trying to work out what is wrong. It seems there is a problem reading and writing data on the SD card. Screenshot files are being created, but no data is being written or not all the data.
Also, radio and model settings are also on the SD card and they are not being written either.
I'll see if I have a larger capacity card I can try to see if that is the problem, I have mostly 4Gb and 8Gb cards.
Mike
I have an SD Verbatim 16GB.
I don't think it will be the size. HW can not be preset for slow writing as changes are not saved.
Re: ErskyTx on X20
Posted: Fri May 27, 2022 6:59 am
by jurajjurej
I'll try a faster 32 GB card.
Re: ErskyTx on X20
Posted: Sun May 29, 2022 12:29 pm
by MikeB
Are your radio settings being saved? Things like volume, brightness, screen colours?
I'm writing some code to test the SD reading/writing.
Mike
Re: ErskyTx on X20
Posted: Sun May 29, 2022 8:45 pm
by MikeB
A test you could try is to makes some changes to a model, then select a different model (which should force the first model to be saved), then select the first model again, then power off and on and see if the changes have been saved.
Mike
Re: ErskyTx on X20
Posted: Mon May 30, 2022 3:52 pm
by jurajjurej
MikeB wrote: ↑Sun May 29, 2022 12:29 pm
Are your radio settings being saved? Things like volume, brightness, screen colours?
I'm writing some code to test the SD reading/writing.
Mike
Something changes (saves) something after switching off.
Color, brightness -Yes.
screanshot -ne switch
Adjust volume (S1) -no
Mixi -nie
Model name - no
Alarm volume -Yes (but don't hear)
The welcome sound does not work.
If I set model2 and return the selection to model1. The model1 settings are cleared. It is renamed Model 01
Re: ErskyTx on X20
Posted: Mon May 30, 2022 3:52 pm
by jurajjurej
MikeB wrote: ↑Sun May 29, 2022 12:29 pm
Are your radio settings being saved? Things like volume, brightness, screen colours?
I'm writing some code to test the SD reading/writing.
Mike
Something changes (saves) something after switching off.
Color, brightness -Yes.
screanshot -ne switch
Adjust volume (S1) -no
Mixi -nie
Model name - no
Alarm volume -Yes (but don't hear)
The welcome sound does not work.
If I set model2 and return the selection to model1. The model1 settings are cleared. It is renamed Model 01
Re: ErskyTx on X20
Posted: Mon May 30, 2022 4:19 pm
by jurajjurej
I've tried three SD cards. (1GB, 16GB, 32GB of various speeds)
The issue with saving changes has not been fixed. Neither sound works nor screanshot.
Re: ErskyTx on X20
Posted: Mon May 30, 2022 4:41 pm
by jurajjurej
MikeB wrote: ↑Sun May 29, 2022 8:45 pm
A test you could try is to makes some changes to a model, then select a different model (which should force the first model to be saved), then select the first model again, then power off and on and see if the changes have been saved.
Mike
Yes, that's how the changes were written.
And now they are enrolled without switching models. (forced enrollment)
I'm still going to test different settings.
Does the "Welcome" sound not work? No alarms
No sound.
The screenshot is already working. It would be better if it was saved in the "screenshot" folder.
- 20140515_134829.jpg (71.31 KiB) Viewed 61125 times
Re: ErskyTx on X20
Posted: Mon May 30, 2022 6:20 pm
by MikeB
What files are in the "RADIO" directory on the SD card and what are the last modified dates?
Please confirm there is a file "\Voice\system\WELCOME.wav" on the SD card.
I should have a special test version that may help locating your problems ready tomorrow.
Mike
Re: ErskyTx on X20
Posted: Mon May 30, 2022 7:16 pm
by jurajjurej
MikeB wrote: ↑Mon May 30, 2022 6:20 pm
What files are in the "RADIO" directory on the SD card and what are the last modified dates?
Please confirm there is a file "\Voice\system\WELCOME.wav" on the SD card.
I should have a special test version that may help locating your problems ready tomorrow.
Mike
The last adjustment is, of course, today. It miraculously records the changes. (helped test with forced save)
Previously, the "RADIO" folder was empty! Sounds don't work
SD card:
Re: ErskyTx on X20
Posted: Tue May 31, 2022 10:00 pm
by MikeB
Do you have any audio output at all? I assume you have the volume set above 0, and the bar showing the current volume setting has some black in it on the status line at the bottom of the main screen.
You should get some beeps if you change the trim settings with the trim switches.
Mike
Re: ErskyTx on X20
Posted: Wed Jun 01, 2022 1:05 pm
by Narcis
Hi Mike,
I also have no audio output at all, even with trims. Volume set is at maximum: 23.
Audio files are in correct directories.
My X20 is an X20S.
Narcis.
Re: ErskyTx on X20
Posted: Wed Jun 01, 2022 10:57 pm
by MikeB
I'll add a bit more debug to the test version I'm doing to try to locate the audio problem. It is working fine for me!
Mike
Re: ErskyTx on X20
Posted: Thu Jun 02, 2022 10:39 pm
by MikeB
I've posted a test version. This has a SD menu in "Statistics".
The cluster size is shown at the top. We would like to see 32 here.
There is a column of 6 values under "Debug". These are filled in with results from the voice task as it runs.
If you don't have any voice or other audio output, please let me know what these 6 values are.
Mike
Re: ErskyTx on X20
Posted: Thu Jun 02, 2022 11:23 pm
by jurajjurej
MikeB wrote: ↑Tue May 31, 2022 10:00 pm
Do you have any audio output at all? I assume you have the volume set above 0, and the bar showing the current volume setting has some black in it on the status line at the bottom of the main screen.
You should get some beeps if you change the trim settings with the trim switches.
Mike
I have a volume added. You can see it in the picture. And set to 25.
Trimmers don't beep.
Re: ErskyTx on X20
Posted: Fri Jun 03, 2022 4:50 am
by jurajjurej
MikeB wrote: ↑Thu Jun 02, 2022 10:39 pm
I've posted a test version. This has a SD menu in "Statistics".
The cluster size is shown at the top. We would like to see 32 here.
There is a column of 6 values under "Debug". These are filled in with results from the voice task as it runs.
If you don't have any voice or other audio output, please let me know what these 6 values are.
Mike
After upgrading to the test version "r12", the screenshot did not work and then after restarting the SD card (system) crashed.
Here is the photo:
- P6030627.JPG (67.7 KiB) Viewed 60991 times
- P6030629.JPG (74.26 KiB) Viewed 60991 times
- P6030630.JPG (71.7 KiB) Viewed 60989 times
Re: ErskyTx on X20
Posted: Fri Jun 03, 2022 6:50 am
by jurajjurej
Screenshots:
Re: ErskyTx on X20
Posted: Fri Jun 03, 2022 8:04 am
by jurajjurej
The idle alarm can be seen on the voice indicator that it has activated.
Re: ErskyTx on X20
Posted: Fri Jun 03, 2022 11:40 am
by MikeB
Your Cluster Size is 8. This means storage is allocated 8K at a time, not the 32K I would like to see.
There is a File Allocation Table (FAT) on the card (usually two of them). Each entry to this is a 32-bit (4-byte) value, so 128 fit in a 512-byte sector.
Having only 8K Cluster Size means the FAT is 4 times larger than with 32K Cluster Size, and so requires many more reads and writes to access a file and to find unused space when writing. This reduces the performance.
I would suggest reformatting a SD card with a 32K Cluster size. It is recommended to use the card formatter software provided by the SD Association as this will use the correct Cluster Size. I use the program SDFormatter.exe (for Windows) from them.
I'm checking the debug information next. This is showing some errors.
Mike
Re: ErskyTx on X20
Posted: Fri Jun 03, 2022 11:45 am
by jurajjurej
No voice file can be confirmed (selected)
Re: ErskyTx on X20
Posted: Fri Jun 03, 2022 11:48 am
by jurajjurej
MikeB wrote: ↑Fri Jun 03, 2022 11:40 am
Your Cluster Size is 8. This means storage is allocated 8K at a time, not the 32K I would like to see.
There is a File Allocation Table (FAT) on the card (usually two of them). Each entry to this is a 32-bit (4-byte) value, so 128 fit in a 512-byte sector.
Having only 8K Cluster Size means the FAT is 4 times larger than with 32K Cluster Size, and so requires many more reads and writes to access a file and to find unused space when writing. This reduces the performance.
I would suggest reformatting a SD card with a 32K Cluster size. It is recommended to use the card formatter software provided by the SD Association as this will use the correct Cluster Size. I use the program SDFormatter.exe (for Windows) from them.
I'm checking the debug information next. This is showing some errors.
Mike
I'll try.
Re: ErskyTx on X20
Posted: Fri Jun 03, 2022 1:49 pm
by MikeB
A short press of ENTER should play the highlighted voice file, a LONG press should select it.
Mike
Re: ErskyTx on X20
Posted: Sat Jun 04, 2022 6:14 am
by jurajjurej
Formatting SD didn't help much
Fixed to SD 32 clusters.
But no sound and no radio settings or model settings are recorded.
Re: ErskyTx on X20
Posted: Sat Jun 04, 2022 6:20 am
by jurajjurej
MikeB wrote: ↑Fri Jun 03, 2022 1:49 pm
A short press of ENTER should play the highlighted voice file, a LONG press should select it.
Mike
Does not work.
Short click to go to file name (keyboard)
A long press does not select the VAW file and remains empty.
Re: ErskyTx on X20
Posted: Sat Jun 04, 2022 6:42 am
by jurajjurej
Not created "RADIO" folder. "RADIO" not SD card content?
Unable to save current SD card content for ErskyTX and "Voice" at
http://www.er9x.com/
Re: ErskyTx on X20
Posted: Sat Jun 04, 2022 8:38 pm
by MikeB
I'm just creating a better debug system to help here.
I think there may be two types of main board (is your radio a X20 or X20S?), with slightly different connections to the processor. One of these may be an enable signal to the audio amplifier, I'm checking this out.
I can download the SD contents from er9x.com OK, are you having trouble with that, or with writing this to the SD card?
Mike
Re: ErskyTx on X20
Posted: Sat Jun 04, 2022 9:45 pm
by MikeB
I've posted a new test version. In the "Statistics" area is a new menu labelled "REPORT". This contains text of debug information, up to 100 lines. When this menu shows, press ENTER to stop the screen index flashing (6/8?), then the encoder will scroll the text.
This text should indicate what is happening when reading/creating the RADIO directory, and also when playing a voice file.
There is also a change where I detect an input indicating the board type, and I do something different when starting the audio driver depending on the board type.
Mike
Re: ErskyTx on X20
Posted: Sun Jun 05, 2022 6:44 am
by jurajjurej
Reformatted SD. (Claster 32 OK) Clean install SDtest. Composite creation is already OK. (fast)
If I switch to another model, my name will be deleted to the default Model 01, etc. and lose the settings. Sounds don't work. Once the settings have been saved (background color). Then the radio and model settings are no longer saved.
I don't know what to try anymore. It's still fooling around.
Re: ErskyTx on X20
Posted: Sun Jun 05, 2022 6:53 am
by jurajjurej
MikeB wrote: ↑Sat Jun 04, 2022 8:38 pm
I'm just creating a better debug system to help here.
I think there may be two types of main board (is your radio a X20 or X20S?), with slightly different connections to the processor. One of these may be an enable signal to the audio amplifier, I'm checking this out.
I can download the SD contents from er9x.com OK, are you having trouble with that, or with writing this to the SD card?
Mike
I have a Tandem X20 radio.
SD content goes to download OK. I just wanted to know if it's up to date for ErskyTX.