openrcforums

Hello,
I have a Radioking TX18S. I have problems with updating the firmware/copying safed models back to the radio.

In all the Firmware updates Radioking is not mentioned as supported Radio. It looks like a Radiomaster TX16s, but has one button less (page back). In another thread here (viewtopic.php?f=98&t=12963&p=151765&hil ... ng#p151765) I read that it is internally the same as an Jumper T18.

Attached is a screenshot with the choices of Radios OpenTx is giving me. Which radio should I choose?

Thanks,
spcboarder

It is a Jumper T18 clone so just select that and all will be ok. I have a Radioking TX18s and it worked for me, when I upgraded to Open-Tx 2.3.11. Enjoy the radio.

Thanks suncoaster!

I selected the Jumper T18 and I could bring back my safed models
BR, spcboarder

PS: so far this radio is giving me some headaches. I hope I will solve thes issues. I hope you guys from the forum can help me out on my further challenges as well!

Unfortunately the Firmware for a Jumper TX18 does not work. There I get a
"WrongPCBdetected Error".

I downloaded Firmware: Jumper T18-6-12-2.3.8V0027.bin

However, I just updated the Jumper software to 2.3.12 and now my Radio seems to work and I even get the DSM X11ms Protocol, which (I hope) will be the key for binding to Spektrum (DSMX) receivers.

Br, spcboarder

does tx18s have firmware support on opentx and edgetx ?

OpenTX no, EdgeTX no idea.