openrcforums

Hi

I have a Carbon Cub S2 and a Jumper T16 Pro V2

I have the Cub configured on the T16 apart from Safe mode selection. I have looked at several video's but it just doesn't seem to work the same way.

most of them say add a Mix in on Channel 6 with a 3 way switch. ( this works fine on Real flight 9.5) but on the Cub i don't get the full three options. the best I get is safe and intermediate and not Experienced (AS3X) I can tell this by the light on front of the plane and by seeing the movment.

I mainly want to be able to just select AS3X and not the other two modes but I just can't seem to get it working.

can anyone shed some light for me please?

Kilrah wrote: ↑Mon Jun 07, 2021 5:52 pm https://www.multi-module.org/using-the- ... afe-select

I just got my tx16s in. I was able to bind it with the A320A in the carbon cub s2. However I cannot get the switch to work at all (beginner/intermediate/expert). I followed your link but it still is not working for me.

The transmitter is set to mode 1.