No Smartport Telemetry showing on 9XR Pro
Posted: Sun Sep 13, 2020 6:27 pm
I'm using a 9XR Pro with XJT module, ErskyTx v222.
Receiver is Frsky R-XSR with SBUS and Smartport connected to Matek F411WSE flight controller under iNav, iNav telemetry enabled, wired to TX2 per Matek instructions.
On the 9XR Pro:
Protocol:
External XJT
Proto XJT RxNum 0
Detect Telem. Auto
Type D6(X)
Telemetry:
UsrProto FRHUB (or FrSky, I have tried both many times)
BT Telemetry Off
Telem. Com Port 1
Com Port Invert None
There is telemetry coming from the receiver, A1 reports the voltage powering the receiver, and RSSI is also reported. But no telemetry from the flight controller is reported, for example GPS coordinates are always zeroes.
Any ideas how to proceed? Thanks!
Receiver is Frsky R-XSR with SBUS and Smartport connected to Matek F411WSE flight controller under iNav, iNav telemetry enabled, wired to TX2 per Matek instructions.
On the 9XR Pro:
Protocol:
External XJT
Proto XJT RxNum 0
Detect Telem. Auto
Type D6(X)
Telemetry:
UsrProto FRHUB (or FrSky, I have tried both many times)
BT Telemetry Off
Telem. Com Port 1
Com Port Invert None
There is telemetry coming from the receiver, A1 reports the voltage powering the receiver, and RSSI is also reported. But no telemetry from the flight controller is reported, for example GPS coordinates are always zeroes.
Any ideas how to proceed? Thanks!