Upgrade to V6 All Metal Hotend with V6 Heavy Duty Mount (CR10 3D Printer)
Posted: Sat Dec 07, 2019 7:35 pm
TH3D V6 All Metal Hotend with V6 Heavy Duty Mount Upgrade to the CR10 3D Printer
List of items I used:
1) V6 Tough Ultimate Hotend Package:
https://www.th3dstudio.com/product/th3d ... d-package/
or this https://www.th3dstudio.com/product/tough-v6-hotend/
a) Tough All-Metal Hotend w/Nozzles
b) Silicone Sock
c) Titanium Heatbreak
d) 50 Watt Heater
e) Thermistor
f ) Tough Tube - High Temp, Tight Tolerance PTFE Tubing with
Tough PTFE PC4-M10 Fitting
Tough PTFE PC4-M6 Fitting
https://www.th3dstudio.com/product/esse ... rade-pack/
g) 40mm 12V Fan
h) Two: 5015 12V Fans
2) CR-10/CR-10S V6 Heavy Duty Mount – 5015 Fan and EZABL (ABS):
https://www.th3dstudio.com/product/cr-1 ... and-ezabl/
3) Left-Hand 5015 Fan Add on Bracket (ABS):
https://www.th3dstudio.com/product/left ... n-bracket/
4) Two: M3 x 4mm Button Head hex-socket screws.
5) Two: M3 x 20mm Button Head hex-socket screws (5015 Fans).
6) Two: M3 x 10mm Flat Head hex-socket screws.
7) Two: M3 x 22mm Flat Head hex-socket screws.
8) Six: M3 Nuts. https://www.amazon.com/Shapenty-100PCS- ... -1-catcorr
9) Two: M3 x 12mm Allen Round-Head self-tapping screws (40mm Fan). 10) Three: JST-SH Servo Plug Wires (for making fan connections).
https://www.amazon.com/RCmall-Servo-Ext ... deo&sr=8-4 ----------------------------------------------------------------------------------------------
Process:
11) Note: I used for this upgrade, the Stock CR10 Extruder for this upgrade.
12) I also used the Stock CR10 Thermistor and Heater, which are
attached to the Hotend-Cable coming from the Control Box.
13) Remove the Stock CR10 Hotend-Cable from the Control-Box to the CR10 Printer. 14) Make the Fan-Wire ends and Hotend-Cable Fan-Wire ends to use the JST-SH Servo Plugs.
(Cut/Strip/Solder/Heat-Shrink-Tubing, to attach the JST Plugs) 15) At the bench, I fit these parts together before assembling them to the CR10 Printer.
16) After everything is attached and fitted together, I was then ready to assemble upgrade to my CR10 Printer.
.
..