This upgrade is very good to do as it allows you to have remote access to your 3D Printer
and having a USB Web Cam you can help to have visual monitoring in-real-time of your printing job.
List of Parts Used
1) Raspberry Pi 3B
2) Raspberry Case with Fan and Cooling Heatsink: (https://www.youtube.com/watch?v=WhmjlL3Pkhs).
3) 5 volt Power Supply that has at least 3 amps or more output power (USB connection).
I used:(https://hobbyking.com/en_us/15w-3a-usb-charger-1.html).4) SanDisk Ultra Micro SD card 32 GB (you want to use a quality micro SD card as the cheap ones can become easily corrupted).
5) Download EZPi image (zip) file from TH3D.
6) USB cable for connection between Raspberry Pi and CR10 Control Box.
7) Ethernet connection.
8) USB Web Camera (Logitech c270).
9) Find some more info about TH3D EZPi here: (https://www.th3dstudio.com/knowledge-ba ... mentation/).
10) Here you can purchase a TH3D hardware/software kit "EZPi – Plug and Play Octoprint Setup":
(https://www.th3dstudio.com/product/ezpi ... int-setup/).
Update: Here you will find some info at TH3D: https://support.th3dstudio.com/helpcent ... -versions/
Also here: https://www.th3dstudio.com/product/ezpi ... ontroller/