Page 1 of 1
V977 setup Template
Posted: Fri Jul 21, 2017 6:57 pm
by larezwarez
Well, thank´s everybody for helping out on this forum, it´s great!
Need some help with er9x to set up my wltoys V977 to work.
Does someone have a template for this or can explain it how to set it up!
Hope there is someone out there that´s flying a v977 with Er9x or opentx!
Have a good one!
Re: V977 setup Template
Posted: Tue Sep 12, 2017 3:23 pm
by ipreventdeath
I posted an eepm file for the V977 in this thread.
viewtopic.php?f=94&t=8954&p=116197&hili ... pm#p116197
The setting are identical for the V950. There are sequencing steps involved for proper function of all settings with both the V977 and the V950. I believe this is generally where people are having issues. Even with the WL Toys stock transmitter, 3D mode must be enable for idle up to function properly. 3D flight requires both settings to be engaged.
Re: V977 setup Template
Posted: Thu Sep 14, 2017 1:56 pm
by larezwarez
never mind
Re: V977 setup Template
Posted: Fri Sep 15, 2017 6:40 pm
by larezwarez
Here is a link for some pictures of his settings.
The way he has setup his switches is for his liking!
I have made the same settings in my TGY9x with er9x and theres a link to the model settings file for eepe (not eepesky)
Well most of the settings works except for the pith up, i must have almost full throttle to hover but the negative pitch is allright.
Anny suggestions?
viewtopic.php?f=94&t=8954&p=131929#p131929
Her is a link to a pdf file that shows my settings for v977 and v950
v977_v950_pdf